-
E-mail
2019288892@qq.com
-
Phone
15801211415
-
Address
No.1 Beiqing Road, Changping District, Beijing
Beijing Bonn Instrument Measurement and Control Technology Co., Ltd
2019288892@qq.com
15801211415
No.1 Beiqing Road, Changping District, Beijing
On February 3, 2020, Wuhan Huoshenshan Hospital officially began admitting patients, and Leishenshan Hospital is also about to be delivered. In order to better ensure the safety of medical staff fighting on the front line of epidemic prevention and control, Bonn instrument infrared human body temperature recorders have been installed in hospitals such as "Huoshenshan" and "Leishenshan" in Wuhan, as well as in hotels where doctors reside.These devices can continuously monitor the temperature status of medical staff 24 hours a day. Once someone experiences abnormal conditions such as fever, they can issue timely warnings, buy valuable treatment time for new infections, and prevent further spread of the coronavirus within the hospital.

Infrared rapid screening device for human surface temperatureInfrared human body screening device, infrared body temperature screening device Infrared screening device
3. The detection sensor is imported from Belgium, non-contact long-distance detection, safe and reliable. The sensor hasFeatures such as thermal gradient compensation and high screening accuracy, with effective detection range up to:1100mm;
5. Turn on the sound and light alarm device when the body temperature is too high to avoid cross infection caused by abortion. When the body temperature is normal, the green light indicates normal passage;
7. Adopting automatic compensation calibration technology for environmental temperature, the compensation calibration mode is automatically switched to effectively avoid the impact of changes in environmental temperature on the measurement accuracy of the screening instrument;
9. Equipped with a network camera and video monitoring system, it automatically captures and stores images of suspected fever in individuals with high body temperature, displaying the surface temperature of the human body (GD21-TY2B type).
1、 Introduction
The infrared body temperature screening device is an instrument that can quickly detect the body surface temperature of the human body. The person being tested can quickly measure the body surface temperature without stopping. Therefore, the infrared temperature screening device is particularly suitable for screening people with high body temperature caused by the presence of infectious viruses in rapid abortion channels, thus achieving the goal of avoiding virus transmission.
3.2 The sensor itself can simultaneously measure the ambient temperature and the surface temperature of the human body.
The sensor substrate temperature is measured by PTAT, and all sensor control and data processing are processed on the chip. The linearized sensor chip temperature Ta can also be read from the new product memory. The calculated temperature has a resolution of 0.02 ℃, and the linearized substrate temperature reading is stored in the 006h register of RAM at address 0 × 06
-0 × 06=0 × 4DE4 (19908d) corresponds to+125 ℃ (upper limit of linearized output)
Ta[°K]=Tareg×0.02,or0.02°K/LSB.
The output result is stored in RAM at a resolution of 0.02 ℃. The calculation of To is as follows:
5.2 The bracket is available in two options: lateral bracket and lifting bracket. Both brackets are made of corrosion-resistant stainless steel material, which is transparent throughout and has a beautiful overall structure. The lateral bracket adopts fixed stainless steel seamless square tube; The lifting bracket adopts a lifting stainless steel seamless round tube. Both types of brackets are equipped with anti slip movable square chassis.

Software Copyright Certificate for Infrared Human Temperature Screening Device
AA * Credit Enterprise Level Certificate
AA * Enterprise Credit Rating Certificate
RoHS standard certification
Measurement Calibration Certificate
4meet the standard
GB/T 19146-2010 General Technical Conditions for Infrared Human Surface Temperature Rapid Screening Instrument
RoHS 2011/65/EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electronic and Electrical Equipment
7、 Technical parameters
model |
BN-HWTW71-TY2 |
BN-HWTWD71-TY2A |
BN-HWTWD71-TY2B |
BN-HWTW71-TY3 |
BN-HWTW71-TY3A |
configuration | |||||
sensor |
Infrared 14 |
Infrared 14 |
Infrared 14 |
thermal imaging |
thermal imaging |
response time |
≤ 0.25 seconds |
≤ 0.25 seconds |
≤ 0.25 seconds |
≤ 0.2 seconds |
≤ 0.2 seconds |
measure distance |
400mm~600mm |
400mm~600mm |
400mm~600mm |
1 meter |
1 meter |
Testing Scope |
35℃~42℃ |
35℃~42℃ |
35℃~42℃ |
35℃~42℃ |
35℃~42℃ |
alarm device |
audible and visual alarm |
audible and visual alarm |
audible and visual alarm |
audible and visual alarm |
audible and visual alarm |
controlled output |
|
Control braking equipment |
Control braking equipment |
|
Control braking equipment |
Network camera |
|
|
Camera overheating photography |
Camera overheating photography |
Camera overheating photography |
software platform |
|
|
Temperature management platform |
Temperature management server |
Temperature management server |
Host bracket |
Stainless steel single side installation (height not adjustable) / |
Stainless steel single side installation (height not adjustable) / |
Stainless steel single side installation (height not adjustable) / |
Top mounted/Side mounted/Column mounted |
Top mounted/Side mounted/Column mounted |
Host color |
white |
white |
white |
white |
white |
|
8、 Configuration List |