1、 Project Overview

*****Heat Treatment Co., Ltd. is located in *****, Hebei Province. Our main business isHeat treatment process design, metal heat treatment processing, heat treatment technology servicesWait, this project requires the design of a continuous carburizing and quenching production line to produce oil fume exhaust gas during quenching, which needs to meet local environmental standards after treatment.

two、target task

2.3.1Collect the oil mist and exhaust gas generated by the quenching oil tank during quenching filtration,The collection rate is greater than95%;

2.3.2Construct chimneys and conduct testing in accordance with national standards, as well as inspect inclined ladders(The tilt angle cannot exceed60degree),The height of the chimney cannot be lower than15rice;

2.3.3The exhaust gas treatment device has fire safety function

2.3.4The exhaust emission index is better thanGB16297-1996(Comprehensive Emission Standards for Air Pollutants),reach, achieve, attainDB11501-2017(Beijing Comprehensive Emission Standards for Air Pollutants)Latest standard regulations and relevant provisions in local standards:

IIIdesign scope

Including design, manufacturing, and transportation to the factoryLoading and unloading in place, on-site installation, single machine debugging, system integration debugging, acceptance, training until delivery and use requirements.

Continuous carburizing heat treatmentComposition of oil fume purification system:

uSmoke collection device (cover)

uSelf cleaning oil fume purifier integrated host

uPipeline systemunify

uPipeline sprinkler system

uElectronic Control Operating System

utemperature measuring device

uSound and light alarm device

4、 Scheme Description

1.Plan Overview:What needs to be designed this time is three continuous furnace co infiltration quenching production lines, and the oil fume exhaust gas generated during the quenching process. According to our company's on-site investigation, the exhaust air volume for designing three quenching wires to be used simultaneously is20000m³/hOur company's self-cleaning oil fume purification integrated machine is selected as the purification equipment（FOM-ACType).

2Processing technology:

FOM-ACtypeThe self-cleaning oil fume and mist purification system is an efficient and intelligent industrial oil mist purification equipment, which hasAutomatic cleaning water circulation systemPLC Intelligent operation, remote monitoring, intelligent operation, high efficiency and energy saving, low energy consumptionOne of themProduct. extensiveApplied in industries such as mechanical manufacturing, quenching heat treatment, electronic and electrical appliances, and hardware processing, it is used to process oil mist, water-based mist, oil fume, and other non flammable and explosive gas particles generated by cutting oil, mechanical oil, quenching oil, emulsion, and synthetic coolant processingThe substance has a good purification effect.

FOM-AC-CC Standardized component production of self-cleaning oil mist purification equipment, modular combination of 8 process principle units, can be customized according to needsPlease choose to assemble it. Not only can it collect mineral oil, bio oil, mechanical oil or synthetic oil, industrial oils and fats generated in industrial production processesSeparation and purification can also effectively treat the black smoke and exhaust gas generated during the production process, thereby achieving relevant environmental standards before discharge. Jinke SelfThe main developed oil mist purification equipment can efficiently remove oil mist in the workshop environment, which is in line withOSHA Standards to protect your employees and resourcesAnd facilities bring more economical and efficient production methods.