High pressure water jet cleaning equipmentUsing water as the medium, high-pressure water jet cleaning equipment compresses water with a high-pressure pump to achieve a certain value of water pressure (usually 50-300 MPa). The high-pressure water generated after pressurization reaches a special specification nozzle through a specially designed high-pressure hose and other paths. The nozzle sprays multiple beams, angles, and strengths of high-pressure water jets according to the cleaning needs. The high-pressure water jet cleaning equipment cuts, crushes, squeezes, impacts, erodes, grinds, and wedges the dirt on the surface of the scaling, attachments, and blockages inside the cleaned equipment to achieve the purpose of cleaning. No matter what kind of scaling deposits - rust and oxide scale, resin, chemical residues, paint or epoxy resin, they can all be easily solved.

　　High pressure water jet cleaning equipmentTechnical features:

1. Low cleaning cost: Firstly, the medium used for high-pressure water jet is tap water, which is easy to source and widely present. During the cleaning process, due to its powerful energy, it can be cleaned without adding any fillers or detergents, resulting in low cost. Secondly, it is water-saving and energy-saving. This cleaning method is different from firefighting water and belongs to fine jet spraying. The nozzle diameter used is only 0.5-2.5 millimeters, so the water consumption is only 3-5 cubic meters per hour. The power used is 37-90 kilowatts, so it belongs to water-saving and energy-saving equipment.

2. Good cleaning quality: When cleaning pipes and heat exchanger holes, all scaling and blockages inside the pipes can be completely removed, and the metal body can be seen.High pressure water jet cleaning equipmentThe high-pressure water jet with enormous energy and supersonic motion is capable of destroying hard deposits and blockages, but has no destructive effect on metals. At the same time, due to the fact that the pressure of high-pressure water is lower than the compressive strength of metal or reinforced concrete, it has no destructive effect on the pipeline. Realize high-quality cleaning.

3. Fast cleaning speed: Due to the combined crushing effects of water jet (also known as water bomb in foreign countries) such as erosion, cutting, shearing, and grinding, scaling can be immediately broken and removed. It is several times to tens of times faster than traditional chemical methods, sandblasting and shot blasting methods, simple mechanical and manual methods for cleaning.

4. High pressure water jet cleaning equipment has no environmental pollution: Water jet cleaning does not generate a large amount of dust like sandblasting, shot blasting, and simple mechanical cleaning, which pollutes the atmospheric environment and damages human health. It is not like chemical cleaning, which generates a large amount of acid and alkali waste liquid to pollute the road, soil and water quality. Water jet is a type of water jet that uses tap water as a medium and is odorless, tasteless, and non-toxic. After the jet is atomized, it can reduce the concentration of air dust in the work area and lower the atmospheric dust from 80 mg/cubic meter by other methods to below 2 mg/cubic meter according to the national safety standard. It is an important measure for China's environmental protection cause to eliminate the toxicity of acidic and alkaline waste liquids, which is the source of silicosis.

5. Metal corrosion: Due to the use of pure physical methods, it has no corrosive effect on metals.

6High pressure water jet cleaning equipmentWidely applicable: Any part that can be directly hit by a water jet, whether it is the inner cavity of pipelines and containers, the surface of equipment, hard deposits, or solid blockages, can be quickly removed from the mother body and cleaned thoroughly. This cleaning method has no special requirements for equipment material, characteristics, shape, and types of deposits, only requiring direct exposure, so its application is very extensive.

The high-pressure water jet cleaning equipment is designed for users with high flow rates and pressures. It features a specially designed copper pump head and a slanted disc plunger pump. Each plunger is coated with ceramic technology to enhance its wear resistance. The machine itself has a stop gun protection function, a large delay function, and a safe and dry operation function, greatly extending the service life of the motor. The front and rear shock buffering design of Hercules * can provide you with a smooth base and flexible working range when in use.

　　High pressure water jet cleaning equipmentA cleaning device that uses a high-pressure water generating device to pressurize water to hundreds of atmospheres or more, and then converts it into a high-speed micro 'water jet' through a spray device with a small aperture. The speed of this' water jet 'is generally above twice the Mach number, and high-pressure water jet cleaning equipment has enormous impact energy and can complete different types of cleaning tasks.