During the long-term use of oil pipelines, it is inevitable that pollutants such as petroleum, grease, wax, etc. will be generated on the inner and outer walls of the pipelines, resulting in issues such as pipeline efficiency. The use of conventional cleaning methods is often unsatisfactory. Conventional cleaning methods not only have low cleaning efficiency, but also have less than ideal cleanliness.

So what cleaning method can be used to achieve the expected cleaning effect?

Use explosion-proof high-pressure cleaning machine to clean oil pipelines. Not only is the cleaning efficiency high (the cleaning time for one oil pipe is only about 2 minutes), but the cleaning effect is also very good.

In general, the high-pressure water jet of an explosion-proof high-pressure cleaning machine can reach a temperature of 150 ℃ and a pressure of 200 bar. High temperature can not only quickly melt grease, wax, and oil, but also quickly rinse the melt. This cleaning method is not only cost-effective, but also energy-saving and environmentally friendly. This is a great method for cleaning oil pipes.

Explosion proof plunger pump to maintain high-pressure operation of high-pressure cleaning machine

1. After each use of the high-pressure pump, rinse the residual liquid in the hose and nozzle with clean water, clean the casing, and if damage or insufficient pressure is found in the power cord, store it in a fixed place and mark it as "to be repaired". Notify the maintenance personnel in a timely manner before use; The maintenance personnel responsible for the high-pressure pump shall check the operation of the high-pressure pump once a day and keep records.

2. If seal damage, aging causing leakage, and pressure not rising are found, they should be replaced in a timely manner;

3. Every six months, check the electrical and mechanical performance of the high-pressure pump motor, the main engine and main contactor switch, and add necessary lubricating oil to ensure the normal use and recording of the equipment;

4. Regularly check and release the pressure of the correct safety valve to 1.1 times the rated operating pressure of 1.08;

5. Regularly check the accuracy of the pressure gauge, check the tightness of the belt, replace damaged and vulnerable parts, adjust the clearance between parts, and check and tighten the screws;

6. High pressure pumps should generally maintain a certain oil level. If insufficient lubricating oil is found, it should be kept at one sixth to one seventh of the oil immersed surface and refilled in a timely manner to ensure the normal operation of the equipment;

7. The pump that needs to be turned off for a long time should be cleaned with clean water, the liquid in the pump body should be discharged, all valves should be removed, rust proof oil should be applied, and the entire pump should have anti-corrosion and maintenance functions.

8. If you want to take a long time to handle all aspects of pump inspection and maintenance, or if you are unable to start the pump.