CT4 Explosion proof Diesel Filter Dehydrator/Diesel Purification Equipment

Excellent Potential:CT4 explosion-proof diesel filtration and dehydration machine/diesel purification equipment integrates precision filtration, demulsification, and dehydration. It can remove a large amount of water without heating and quickly separate light oil with a large amount of water content; Mechanical impurities in oil can be filtered and purified to national standards; Cart style design, easy to use, suitable for light oils with high moisture content (ordinary diesel, gasoline, kerosene, etc.).

special Point:

1) This model of oil filter adopts a specially designed oil-water separation filter,No heating is required, ensuring that the additives in the oil do not crack or deteriorate, and the quality of the dehydrated oil can be guaranteed.

2) Easy to operate, able to run water discharge online, no need to leave special personnel to guard.

3) This type of equipment has standard and explosion-proof types.

working principle:Unqualified oil first enters the primary filtration, where large particle impurities are intercepted. The oil with large particle impurities removed is then transported to the fine filter by the oil pump. After removing smaller impurities in the fine filter, it continues to enter the coalescence separator, where the principle of molecular separation technology is used to perform pressure swing analysis on the oil and eliminate intermolecular binding forces,Dissolve water, free water, and rapidly break the oil film in the oil to detach from the oil molecules and precipitate; At this point, dehydration and impurity removal are completed to meet the required moisture and cleanliness requirements.

5) This machine is equipped with comprehensive protective devices. By implementing comprehensive protection for temperature, pressure, vacuum degree, power outage, etc. through various execution components, the machine can effectively prevent accidents and ensure the normal operation of the equipment.

6) The automatic control protection system consists of sensors, motors, protective components, and other components.The factory pressure protection control point of the pressure controller is set to0.4MpaAfter the work pressure reaches the set point, the whole machine will sound an alarm and stop working to prevent accidents from happening.