ZJD lubricating oil filter | lubricating oil vacuum filter

Scope of application:

The ZJD series vacuum oil filter is mainly developed and produced based on the high impurity content of industrial lubricants such as lubricating oil, mechanical oil, anti-wear oil, and engine oil. The machine has a short processing cycle, high efficiency, and can quickly remove moisture, gases, impurities, and volatile substances (alcohol, gasoline, ammonia, etc.) from the oil. Improve the quality of oil, restore the viscosity, flash point, and performance of lubricating oil.

Applied to the purification treatment of hydraulic oil, low viscosity lubricating oil, hydraulic transmission shaft, anti-wear hydraulic oil, gasoline engine oil, diesel engine oil, compressor oil, refrigeration oil, etc. It can quickly remove water, gas, and mechanical impurities from oil, flash evaporate light acids and hydrocarbons, improve oil quality, and restore the performance of lubricating oil. Ensure the normal operation of power, hydraulic, and lubrication systems.

Product Features

• Strong impurity removal ability, large and deep precision filter materials can remove fine particles from oil.
• Multi stage drum filter, large flow washable filter element, high filtration efficiency, using step-by-step encryption technology, can restore severely polluted lubricating oil to within the "Standard for Control of Oil Pollution in Running Steam Turbines".
• Advanced medium heat absorption and condensation system.
• Automatic temperature control heating, automatic separation of condensed water device, easy to operate, safe, and reliable.
• *The ability to break emulsions can separate a large amount of water from the oil and also remove trace amounts of water from the oil.
• Combining agglomeration separation and vacuum dehydration, the water separation device adopts industry polymer membrane agglomeration separation technology, which can quickly separate a large amount of water and micro water from lubricating oil with high water content.
• The deep and high-precision FH rectangular filtration system can effectively remove iron filings, dust, and impurities from oil.
• Tongrui technology for independently developed H, P, and M polymer materials.
• By using high-quality raw components and connecting sealing materials, it meets the high temperature requirements for filtering high viscosity lubricating oil, and expands the types and range of oil that can be purified by the oil filter.
• Using high-quality filter materials, it has a large dirt holding capacity, corrosion resistance, high temperature resistance, good mechanical strength, high impurity removal accuracy, and long service life.
• Humanized design, infrared liquid level control system, electrical automatic protection control system with phase sequence protection and overvoltage protection, and temperature constant automatic control system ensure easy operation, safety and reliability. This machine can work online for a long time, with * oil pump, low noise, and meets the world's high environmental standards.
• And temperature control is3Chain protection:1The heater is also interlocked with the oil pump and vacuum pump, and can only work when the oil pump and vacuum pump are running;2The heater only operates when the oil temperature is below the set temperature;3If the heating temperature exceeds the set temperature, the ultra-high temperature setting protector will activate and stop heating. And the electrical components used in the equipment are all flame-retardant, so our equipment eliminates the safety hazards caused by the failure of the temperature controller.

The hydraulic lubricating oil processed by this machine has low water content and high impurity accuracy, and can be reused repeatedly in high-precision hydraulic lubrication equipment at home and abroad.

And the machine has a novel design and is easy to use, which can truly save fuel and reduce consumption for customers.

ZJDserieslubricating oilTechnical parameter table of oil filter machine