Transformer oil plate frame oil filter machineMainly used to remove mechanical impurities from oil, improve oil cleanliness through physical filtration, and ensure transformer insulation performance. The operation process and precautions need to be strictly standardized to ensure the filtering effect and equipment safety.

1、 Operation process

1. Preparation stage: Check the integrity of the equipment, confirm that the filter plate and frame are firmly installed and sealed, and fill the filter paper according to the requirements and adhere to the surface of the filter plate. Connect the oil inlet pipe, oil outlet pipe, and slag discharge pipeline to ensure that all interfaces are sealed and leak free. Check that the power supply and transmission components are in normal condition.

2. Start up and pre run: First, turn on the oil pump and inject oil at a low flow rate. Observe whether the inlet and outlet pipelines are unobstructed and confirmTransformer oil plate frame oil filter machineNo abnormal vibration or noise during no-load operation. After the oil circuit stabilizes, gradually adjust it to normal working condition and check whether there is any leakage at the sealing of the filter plate and filter frame.

3. Filtration stage: Maintain a stable oil inlet rate and observe the oil filtration situation. Regularly check whether there are impurities seeping out from the edges of the filter plate and filter frame. If the filter paper is found to be blocked by impurities, it should be stopped and replaced in a timely manner.

4. Shutdown and cleaning: After the filtration is completed, close the oil inlet valve first and wait for the remaining oil in the oil filter to be drained before stopping the pump. Release the clamping device, remove the filter plate and frame, clean up residual impurities, and check the usage status of the filter paper. Turn off the power, clean the oil stains on the surface of the equipment, and keep the work area clean.

2、 Precautions

1. Installation and sealing: The filter plate and filter frame must be installed correctly in order, and the filter paper should cover the surface of the filter plate and be tightly adhered. When connecting pipelines, it is necessary to ensure that the interface is sealed to prevent oil leakage or air from entering and affecting the filtration effect.

2. Filter paper maintenance: Filter paper is the core filtering medium and needs to be replaced regularly according to the impurity content in the oil. When replacing, ensure that the new filter paper is flat and undamaged. After filling, gently press it to ensure full contact with the filter plate to avoid displacement during the filtration process.

3. Pressure and flow control: During operation, it is necessary to observe changes in the inlet oil pressure to avoid forced high-pressure operation that may cause deformation or seal failure of the filter plate and frame. The inlet oil flow rate needs to be stable to prevent oil impact from damaging the filter paper structure or causing short-circuit filtration.

4. Safe operation: It is strictly prohibited to insert hands or other objects into the gaps between the filter plate and filter frame during equipment operation. If it is necessary to clean the slag discharge outlet or replace the filter paper, the machine should be stopped and the power should be cut off first, and the internal oil should be drained before operation. When the equipment is not in use for a long time, it is necessary to clean the residual oil stains inside to prevent the oil from deteriorating and corroding the components.

5. Environment and maintenance: It should be placed in a dry and ventilated work area, and the lubrication status of transmission components should be regularly checked to ensure that the clamping action is flexible and reliable.

Standardized operating procedures and strict precautions areTransformer oil plate frame oil filter machineThe key to maximizing filtration efficiency and ensuring the cleanliness of transformer oil. Only by paying attention to detail management can mechanical impurities be effectively removed, laying the foundation for the safe operation of transformers.