Plate and frame filter presses are mainly used for sludge dewatering treatment in various industries. When reducing and resourceful treatment of sludge, the lower the moisture content, the better. However, nowadays, most plate and frame filter presses have uneven sludge cake after dewatering, some with high viscosity and others relatively dry, and the moisture content of the sludge cake is still high.

What's the reason why the mud cake doesn't form?

One of the reasons for the uneven formation of filter cake, the inability to form filter cake, and the high moisture content of sludge cake in the plate and frame filter press is that the feeding system does not supply materials in a timely manner, which cannot meet the pressure of the mixture during filtration, resulting in uneven formation of filter cake.

For the problems that occur with the plate and frame filter press, we should conduct a detailed inspection, identify the cause of the problem, and then solve the problem accordingly.

To solve the problem of uneven and high moisture content in the sludge cake after dewatering of the plate and frame filter press, the system can first investigate the cause. If it is a feeding problem, the system can increase the feeding, adjust the technology, tidy up the filter cloth of the filter press, clean and tidy up the blocked areas in a timely manner, tidy up the drainage ditch and feeding hole, and continuously increase the pressure. All methods can solve the problem of uneven formation of filter cake in the plate and frame filter press.

With the analysis of the above issues, if your filter press encounters the problems reflected in the appeal, and you can correctly determine the cause of the problem, you can promptly repair the filter press yourself, so that the filter press can resume normal operation and save time.