Spiral degassing and cleaning deviceIt can purify the bubbles and impurities in the water purification system, and the result of this integration is that all bubbles and small impurities will be removed, making the system free of bubbles and impurities. Its working principle is different from traditional filters and purification equipment, requiring almost no maintenance. Whether this device can function in the heating system depends on different aspects. The dehydrator must be installed on the main pipeline, and a good location for the heating system is the outlet of the heating unit. For refrigeration systems, high temperatures occur on the return pipe of the refrigeration unit.

　　

According to the principles of centrifugal settling and density difference, when water enters the equipment tangentially from the inlet of the desander under a certain pressure, strong rotational motion will be generated. Due to the different densities of sand and water, under the combined action of centrifugal force and centripetal force, low-density water will rise and be discharged from the outlet, while high-density sand will be discharged from the discharge outlet at the bottom of the equipment. Compared with the current sand removers on the market, it has added a filtering unit (the filtering accuracy can be selected by the user), which has the advantages of high sand removal rate, space saving, low missed detection rate of individual small particles, and stable working state.

　　

Precautions for installation of spiral degassing and cleaning device:

　　

1. The equipment must be installed horizontally. Pay attention to the direction indicated by the arrow during installation, which is the direction of water flow.

　　

2. Due to the absence of moving parts and maintenance free nature of the equipment, design and installation can be arranged according to the actual situation on site.

　　

3. Pipe supports should be installed near the pipe mouth on the equipment inlet and outlet pipelines; A bracket should be installed below the valve that is directly connected to the container pipe mouth and is greater than or equal to DN150.

　　

4. Valves should be installed at the inlet and outlet of the equipment.

　　

This structure enables the spiral degassing and cleaning device to quickly and conveniently remove impurities and dirt from the system during operation. Unlike traditional cleaning methods, spiral cleaning devices can remove separated dirt from the system without shutting down or disassembling the system. After installing the spiral cleaner, your system can keep running without switching to a backup cleaner. The internal structure allows all impurities to settle into the settling chamber at the bottom of the equipment. The decontamination device is not affected by scale accumulation and can work continuously. Unlike ordinary filters, when the fluid flows through the spiral purifier, the pressure drop remains basically unchanged. Experiments have shown that even very small particles can be removed. It can even be said that all solid particles with a specific gravity greater than water can be removed.