Welcome Customer !

Membership

Help

Jiangsu Quanfeng Environmental Protection Technology Co., Ltd
Custom manufacturer

Main Products:

cep-online>Article

Jiangsu Quanfeng Environmental Protection Technology Co., Ltd

  • E-mail

    quanfeng032600@163.cn

  • Phone

    13524707562

  • Address

    5-8 Fengshan Road, Gaochun District, Nanjing City, Jiangsu Province

Contact Now
Cleaning and maintenance instructions for high-pressure fan filter screen
Date: 2024-02-22Read: 2
The impeller of the blower pump body is made of aluminum alloy die-casting, and the motor adopts explosion-proof grade DIIBT4 and DIICT4 protection grade IP55 second level explosion-proof motor The use of explosion-proof blowers; Mainly used in chemical, dust, biogas transportation, coal mines, flammable and explosive places, various mechanical equipment matching, explosion-proof blowers have the advantages of low noise, energy saving, stable performance, and easy maintenance. Moreover, the gas source sent out is free of water, oil, and low temperature rise, which cannot be compared with other gas source generation equipment.
After using the blower for a period of time, the filter mesh in the blower will accumulate a lot of debris. If not cleaned in time, it will lead to an increase in equipment pressure, a decrease in flow rate, and a decrease in operating efficiency. At this time, we need to clean and replace the filter mesh to continue the efficient operation of the blower.
1) If there is a lot of dust accumulation on the filter plate and the surface of the filter is already very dirty, it is necessary to wash it with water to achieve the desired effect (PS: At this time, the filter cotton needs to be replaced as it cannot achieve the filtering effect after washing).
2) When there are not too many impurities on the surface of the filter, clean compressed air can be used to blow both sides until the particles are invisible to the naked eye.
3) If the stainless steel wire on the filter mesh is found to be deformed or damaged after cleaning, it needs to be replaced and used in a timely manner.
4) When cleaning impurities, pay attention to the protection of the mesh on the filter plate, and avoid deformation or damage. Otherwise, the reinstalled filter plate will not be able to achieve its intended effect.
5) The air filter should be cleaned regularly, which is beneficial for the normal operation of the fan. Cleaning once every 15 days is sufficient. Developing the habit of maintaining the filter regularly can help avoid unnecessary trouble.

Last Article:

Next Article: