Blowing water knife high-pressure fanAt present, it is widely used in industry, and a large part of it is achieved through air knives, because the air knife is actually the air from the high-pressure fan that enters the air knife and is blown out at high speed with a thin airflow sheet with a thickness of only 0.05 millimeters on one side. Through the principle of the Coanda effect and the special geometric shape of the wind blade, this thin film wind curtain can generate 30-40 times the ambient air, forming a thin, high-intensity, and high airflow impact wind curtain. Based on your parameter usage of the air knife, it is recommended to use a 7.5kw or 5.5kw high-pressure fan.
The product features of the high-pressure fan with water blowing blade:
1、 The blades and covers of the wind blade fan are made of the world's hardest ADC12 material, equivalent to the same material as Mercedes Benz wheel rims.
2、 The bearings of the wind blade fan adopt high-speed and high-temperature resistant imported bearings, with 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz. They are lubrication free and maintenance free for 150000 hours, equivalent to continuous operation for 17 years.
3、 The inlet and outlet of the wind blade fan are equipped with built-in soundproof pipes to achieve low noise.
4、 High pressure fans below 1.1KW can be used at full pressure.
5、 The pressure of the high-pressure fan is stable, and it has been proven through practical applications in water treatment and electroplating that the stirring is uniform and the water waves roll at the same height.
6、 High pressure fans have a flow rate greater than similar products at the same power and pressure.
7、 The high-pressure fan cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation.
8、 Wind blade fan, wind blade high-pressure fan adopts the principle of bearing front design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving a dynamic balance configuration and facilitating heat dissipation.
(The reason is that there are heat dissipation fins at the front end of the fan blades for heat dissipation, while the bearings at the back end work under the built-in cooling fan of the fan, thus keeping the bearings working for a long time at low temperatures.)
9、 The high-pressure fan adopts a special shock-absorbing foot design, which greatly reduces the vibration generated during the operation of the fan.
10、 Wind blades and fans are economical and energy-saving. Under the same power, pressure, and flow rate, the current of a high-pressure fan is lower than that of other similar products. High pressure blowers are widely used in various industries, such as aquaculture high-pressure blowers, sewage treatment high-pressure blowers, filling equipment high-pressure blowers, electroplating equipment high-pressure blowers, hot spring equipment high-pressure blowers, textile equipment high-pressure blowers, dental equipment high-pressure blowers, and so on.