The rotary toothed rake type grille cleaning machine is used for urban sewage treatment*
Date: 2016-03-07Read: 3
Rotary toothed rake grille cleaning machineIt is a water treatment equipment that can continuously and automatically intercept and remove various shaped impurities in fluids, and can be widely used in urban sewage treatment.
Rotary toothed rake grille cleaning machineThe biggest advantages of the device are high automation, high separation efficiency, low power consumption, no noise, and good corrosion resistance. It can ensure continuous and stable operation without human supervision and is equipped with overload safety protection devices. In the event of equipment failure, it will automatically shut down to avoid overloading. This device can adjust the operating interval of the device according to user needs, achieving periodic operation; It can be automatically controlled based on the liquid level difference before and after the grille; And it has manual control function for easy maintenance. Users can choose freely according to different job needs.
Rotary toothed rake grille cleaning machineAssembled into a set of rotating grid chains by a rake tooth factory. Driven by the motor reducer, the rake chain rotates in the opposite direction of water flow.
When the rake chain is moved to the upper part of the equipment, due to the guidance of the groove wheel and curved rail, relative self-cleaning motion occurs between each set of rake teeth, and the vast majority of solid materials fall down by gravity. The other part relies on the reverse movement of the cleaner to clean up the debris stuck to the rake teeth.
According to the direction of water flow, the rake chain is similar to a grille, and the clearance between the rake teeth assembled on the rake chain shaft can be selected according to the usage conditions. When the rake teeth separate solid suspended solids in the fluid, it can ensure smooth flow of water. The entire work process can be continuous or intermittent.
Technical parameters of rotary toothed rake grille cleaning machine
1. Equipment and rake tooth specifications
The equipment specifications are divided into GSLY300-3600 types according to the machine width size. Machine width
If it exceeds 1800mm, it will be made into a parallel connection. The clearance of the rake teeth is divided into various specifications such as 1mm, 3mm, 5mm, 10mm, 20mm, 30mm, 40mm, 50mm, etc. The selection is based on the amount of water, lifting height, total solid-liquid separation, and the shape and particle size of the separated material. Different materials are also selected.
2. Equipment length specifications
The standard groove depth of the equipment is 1535mm, which can be extended according to user needs and actual usage conditions. Special specifications will be designed separately.
Last Article:
Next Article: