new modelSKD60\\SKB60\\SKC60The actuator dip switch has been changed from the original2One becomes4One.

The specific usage is as follows: dip switch1: represents the forward and reverse direction of the actuator action,OFFState (bottom) represents reverse action,ONThe state (top) represents a positive action. Usually, our valve bodies are reverse valves, so toggle switches are used1No need to adjust.

DIP switch2: Represents the position of the actuator after signal interruption.OFFThe state (bottom) represents that the actuator will close after the signal is cut off,ONThe state (top) is to remain in place.

DIP switch3: Used forDC0--10Vand4--20mAThe switch.OFFThe status (below) isDC0--10V，ONThe status (top) is4--20mA.

DIP switch4: Represents traffic characteristics.OFFState (bottom) represents equal percentage adjustment,ONState (top) represents linear regulation, usually4No need to adjust.