This product is a small slicing machine launched by our company. It has complete functions and can cut four different shapes of slices: large, small circular slices, curved slices, and oblique slices. Its slicing effect is that the surface of the slices is beautiful and neat, without burrs or debris residue. The slicing thickness is uniform, the stability is good, the slicing properties are continuous, the efficiency is high, the volume is small, the space occupation is small, the noise is low, the operation is convenient, the power is saved and safe, and the appearance is beautiful. The slicing thickness of this machine can be automatically adjusted according to one's own needs, making it more versatile.


Main technical parameters
Slice thickness: 0.2-3mm
The largest diameter of medicinal herbs: 30mm
Maximum production capacity: 560pcs/min
Power: 0.3kw
Motor speed: 1400r/m
Voltage: 220V
Weight: 12.5kg
Dimensions: 300 × 240 × 190mm

Feature Overview
The slicer has complete functions and can slice various precious medicinal materials, ginseng food and other materials.
Various traditional Chinese medicines: Tianma, Danggui, Tianqi, Banlangen, Atractylodes macrocephala, Licorice, Polygonum multiflorum, Forsythia suspensa, Huoxiang, Chuanxinlian, Ginseng, etc
Food: sliced kudzu root, yam, hawthorn, red wine, potatoes, ginger, tangerine peel, bananas, walnuts, etc.

Scope of application
Slicers have a wide range of applications and can be used in traditional Chinese medicine stores, ginseng and mushroom shops, Chinese medicine processing factories, etc
Traditional Chinese Medicine Store: It can be used for slicing traditional Chinese medicine. After slicing, the appearance of the Chinese medicine is beautiful, retail, and convenient for consumers to use.
Ginseng and deer antler processing: It can be used to slice and process valuable medicinal herbs such as American ginseng, ginseng, red ginseng, Codonopsis pilosula, deer antler, etc., and sold in packaging, which is both beautiful and convenient.
Chinese medicine processing factory: can be used for slicing and processing various Chinese medicines.

Slicing process
Slicing steps: material preparation - feeding - slicing - discharging
Material preparation: Prepare the materials that need to be sliced, pallets
Feeding: Remove the plastic mold, adjust the slice thickness, turn on the machine, and place the material into the feeding port
Slicing: Press the material tightly with your hand or a press mold, and the material will be automatically sliced. One rotation can cut two pieces
Discharge: discharge from the discharge port

Slicing techniques
1. Preparation stage: A should pay attention to the fact that wet materials are easier to cut than dry materials, and materials that are too dry may be cut into powder form
If the material is too dry or too hard, you can choose to soften it and then slice it
The material with high viscosity can be adjusted to increase the slice thickness.
During the feeding stage, when slicing small pieces of material, a plastic mold should be used to press the slices, otherwise there may be material jumping and incomplete cutting
If the material is a bit large, it can be processed to fit the size of the feeding port first, and then sliced

Precautions and maintenance matters
This machine is suitable for indoor environments with temperatures ranging from -5 degrees to 40 degrees, relative humidity less than or equal to 90%, and no conductive dust or corrosive metal gases around it. It should be placed in a dry, ventilated, and clean location.
When in use, the machine should be placed on a stable workbench with no other unrelated objects around it. The power supply voltage should be confirmed to be normal, and the power socket should have a reliable grounding wire. It is strictly prohibited to pull or pull the power cord forcefully to avoid mechanical damage and other accidents.
3. It is strictly prohibited for underage children to come into contact with this machinery to avoid causing other accidents.
During the use of this machine, it is strictly prohibited to directly insert hands, brushes, or other tools into the workbench to avoid accidents such as finger cutting and mechanical damage.
Before using this machine, with the small door closed, turn on the power, turn on the switch, idle for 30 seconds, and observe for any abnormal phenomena.
When slicing, attention should be paid to applying even force to ensure the uniformity, luster, and completeness of the slices. When cutting hard medicinal herbs, attention must be paid to the load of the machine and the bearing capacity of the blades to prevent damage to the machine due to excessive use.
If the processed slices are fragile and rough, the blade can be removed and sharpened with a grinding stone. The method for disassembling the blade is as follows:
① Use a Phillips screwdriver to remove the four screws from the workbench and take out the workbench.
② Open the small door, insert the hexagonal wrench from the small door, and unscrew the screw that secures the blade.
③ Remove the blade, sharpen it with a grinding stone, and then install it. During installation, care should be taken to avoid scratching fingers.
When cutting materials with adhesive properties, if the adhesive juice sticks to the blade and cannot cut out pieces, the blade should be removed and the adhesive juice should be ground off with an oilstone.
When slicing, if the material is too long, first press the material with your hand. When the material is cut below the worktable, use a die to press the material for slicing (if the sliced material is too short, the die must be used to press the material before operation, and direct manual operation is strictly prohibited to prevent finger cuts).
If the power cord is found to be damaged (with exposed copper wire), it must be purchased from the local office or factory and cannot be replaced with other power cords. Forced use: In case of switch or socket failure, the use must be stopped. It is strictly prohibited to change the circuit and continue using. The switch or socket should be replaced or repaired in a timely manner to avoid other accidents.
After slicing, the power must be cut off, the small door must be opened, and the material should be brushed out with a brush. After use, the blade should be cleaned and wiped with oil to form a protective film. When using it again, the blade should be disinfected with medical alcohol.
It is strictly prohibited to clean the machine directly with water to avoid damage to the machinery.

Common faults and maintenance methods
The motor does not run after being powered on
Reason: ① Poor power contact or loose plug; ② Poor switch contact
Repair method: ① Repair the power supply or replace the plug; ② Repair or replace switches of the same specifications
2 slices are uneven, lack luster, and produce a lot of powder
Reason: ① The blade is not sharp; ② The hardness of the sliced material is too high; ③ The adhesive juice of the sliced material sticks to the blade; ④ Uneven application of force
Repair method: ① Remove the blade and sharpen it with a grinding stone; ② Dry the sliced material until soft; ③ Remove the blade and grind off the sticky juice; ④ Apply even force when slicing
When working, the motor stops rotating
Reason: ① Excessive feeding caused the cutter head to get stuck; ② Poor switch contact
Repair method: ① Check the cutterhead and remove the stuck material; ② Switch contact adjustment or switch replacement