Koribao (Chongqing) Machinery Technology Co., Ltd

Address: Taojia Longding Enterprise Center, Jiulongpo District, Chongqing

Principle of lubricating oil filtration:

Lubricating oil filtration refers to the three-stage filtration of a trolley type oil filter (oil filtering trolley), which uses a filter element for filtration and has a simple operating principle.

The three-stage filtration effect diagram of lubricating oil is shown in the above figure. The principle is simple. This equipment can only filter mechanical impurities and cannot remove moisture, harmful gases, and other substances in the oil. The filtration accuracy can be selected according to customer needs. High precision can reach 1 μ m.

The precision of the three-stage filtration of lubricating oil is:10 μ m, 5 μ m, 3 μ m (conventional configuration accuracy). Each tank has different eyes, and multi-stage filtration uses different pressures based on the filtration accuracy of the filter element, effectively increasing the service life of the filter element. (The multi-level UG law is determined based on the filtering level and filtering accuracy)

Lubricating oil tertiary filtration flow rate:The flow rate filtered between 10L/min and 500L/min (greater than 500L/min is referred to as the filtration system) is the relative ability of new oil pumping and refueling. Generally, the speed of filtering oil is the flow rate? Left or right (depending on the degree of oil pollution)

Service life of filter element:The service life depends on the degree of pollution of the oil, usually around 10 tons of oil should be cleaned or replaced once.

Features:Low price, high filtration accuracy, easy to move, suitable for on-site use, and low cost of consumables.