The submersible float type aerator consists of a float, a bracket, a motor, a mixing chamber, a base, an intake pipe, etc. It has a similar structure to a centrifugal aerator, with an additional float. The upper end of the intake pipe of the float type aerator is the air intake port, located above the water surface, and the lower end is connected to the mixing chamber. After the power is turned on, due to the rotation of the impeller, a high-speed flow of people flows out from the impeller outlet, creating negative pressure in the mixing chamber. Therefore, the air is sucked in and mixed with the sewage, and the mixed liquid flows out from the outlet to complete the oxygenation of the sewage.

The structural characteristics of the aerator:

1. The host can operate underwater with low noise, and a muffler can be installed at the outlet of the intake pipe to enhance the noise reduction effect

2. Imported motor with good sealing technology to prevent grease or lubricating oil from leaking out

3. The impeller and motor are directly connected, with a simple structure, high efficiency, and long service life.

4. The product has a compact structure and utilizes self-priming function without the need for an external power supply. The intake volume can be adjusted through the intake valve

5. The air-water mixture is discharged from the mixing chamber at a special angle, which can make the water flow in a spiral shape towards the horizontal direction and then upwards, with aeration and stirring functions

6. Mixing chamber design, maximum intake of air, good mixing effect, high utilization rate

7. The equipment can be directly used in large areas of water such as rivers and pools without any infrastructure

8. Float can float for easy installation and maintenance