Analysis of the Structure and Working Principle of Spiral Sand Water Separators
Date: 2015-12-04Read: 16
Spiral sand water separatorIt consists of a shaftless spiral, lining strip, U-shaped groove, water tank, guide plate, outlet weir, and driving device.
Spiral sand water separatoryesHow does it work?
The installation angle of the separator is between 20 ° and 30 °. The sand water mixture enters the water tank through the inlet pipe. The particles with a higher specific gravity (such as sand particles) in the mixture settle at the bottom of the spiral groove due to their own weight. Under the push of the spiral, the material is lifted along the bottom of the inclined U-shaped groove. After leaving the liquid surface, it continues to move upward for a distance. The water in the sand particles gradually flows back to the water tank in the gap of the spiral groove, and the sand particles gradually dry at the discharge outlet, relying on their own weight to fall into other conveying devices. The supernatant continuously flows from the drainage pipeFlowing out. Achieve the goal of sand water separation.