Introduction:UV photolysis exhaust gas purification equipmentScope of application: Deodorization and purification of odorous gases in refineries, rubber plants, chemical plants, pharmaceutical plants, sewage treatment plants, garbage transfer stations, kitchen waste treatment plants, feed fish meal plants, printing and dyeing plants, spray painting plants, etc.
　　
Product Performance Overview
　　
Odor removal: It can remove major pollutants such as volatile organic compounds (VOCs), inorganic substances, hydrogen sulfide, ammonia, thiols, as well as various odors. The deodorization efficiency can reach over 99%, which greatly exceeds the national odor pollutant emission standard (GB14554-93) issued in 1993
　　
No need to add any substances: just set up corresponding exhaust pipes and exhaust power to allow odorous gases to pass through this equipment for deodorization, decomposition and purification, without adding any substances to participate in chemical reactions. ，
　　
Strong adaptability: It can adapt to the deodorization and purification treatment of high concentrations, atmospheric quantities, and different odorous gases. It can work continuously 24 hours a day and operate stably and reliably.
　　
Low operating cost: This equipment has no mechanical action, no noise, no need for dedicated management and daily maintenance, only requires regular inspections. The energy consumption of this equipment is low (only about 0.2 kWh of electricity is consumed for every 1000 cubic meters/hour processed), and the air resistance of the equipment is extremely low<50pa, which can save a lot of exhaust power energy consumption.
　　
No pre-treatment required: Odorous gases do not require special pre-treatment, such as heating, humidification, etc. The equipment can work normally in an environment with a temperature between -30 ℃ and 95 ℃, a humidity between 30% and 98%, and a pH value between 2-13.
　　
The equipment has a small footprint and light weight: suitable for special conditions such as compact layout and narrow space. The equipment occupies an area of less than 1 square meter and can handle an air volume of 10000m3/h.
　　
Imported material manufacturing: High fire, explosion, and corrosion resistance, safe and stable equipment performance, made of stainless steel material, with a service life of over fifteen years.