DBY electric diaphragm pump is a more ideal electric diaphragm pump product optimized and improved by Boyu based on imported similar electric diaphragm pump prototypes and the advantages of its own products. The relevant performance parameters * reach the parameters of imported diaphragm pumps. The DBY electric diaphragm pump can be adjusted in size within the range of flow rate of 0.5-20m3/h and head of O-30m, with a diameter of 10-100mm. According to the medium being pumped, overcurrent components can be selected from cast iron, stainless steel electric diaphragm pumps, rubber lined, fluorine lined electric diaphragm pumps, etc. Diaphragm is divided into chloroprene rubber, fluororubber, nitrile rubber, polytetrafluoroethylene, etc., which can meet the requirements of different users.

Characteristics of DBY diaphragm pump:

1. Stainless steel electric diaphragm pump can transport any flowing liquid, as well as some media that are not easy to flow, with reliable delivery.

2. It can be installed without the need for irrigation and has self-priming capacity, which can reach up to 5m. Therefore, there is no need for a bottom valve at the inlet during installation. As long as the inlet pipe is directly inserted into the medium, it can be used, and the installation is very convenient.

3. Electric diaphragm pumps have good performance and smooth flow of conveying medium. Allowing particle media to pass through, the largest particle diameter of DN100 can reach 10mm, which is not achievable by general centrifugal pumps.

4. No leakage. Due to the diaphragm separating the conveyed medium from the transmission mechanical components. This performance ensures that the medium does not leak, and can be widely used in situations where toxic, volatile, or corrosive media are pumped. Rats will not cause environmental pollution and personal safety.

5. Long service life. Due to the lack of shaft seals in the pump itself, wear and tear are relatively reduced during operation, greatly increasing the service life of the entire machine.

6. Due to its compact structure and the ability to transform rotation into sliding, the entire machine operates with low noise and minimal vibration.

7. It can transport media with high viscosity without affecting the performance of the pump.

DBY diaphragm pump is mainly used for:

1. Fluorine lined electric diaphragm pumps can transport toxic media and flammable and volatile liquids.

2. The pump body, PTFE membrane, ball and ball seat of the fluorine lined electric diaphragm pump can also transport liquids containing strong acids, strong alkalis, and strong corrosives.

3. It can also transport high-temperature media below 100 ℃.

4. And it is also used as a pre pressure feeding device for various filter presses as a filter press pump.

5. Used for hot water recovery and circulation.

6. Electric diaphragm pumps can also be used for the loading and unloading of oil tankers, oil depots, and oil products to transport various types of oil media.

7. Stainless steel electric diaphragm pumps can be used in the food industry, such as for sucking fruit juice, mashed potatoes, chocolate, etc.

8. Transport paint, gum, pigment adhesives.

9. Various types of rubber, latex, organic solvents, and fillers.

10. Explosion proof electric diaphragm pump is used for oil tanker barge clearance to extract sewage and residual oil from the warehouse.

12. Pump sewage and sediment from mines, tunnels, tunnels, and sewers.

13. Suction and delivery of various special media.