Main characteristics of hot water high-temperature booster pump
1. The hot water pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in the pipeline like a valve, with installation feet to increase the stability of the pump. It has a compact and beautiful appearance, small footprint, and low construction investment.
2. The impeller of the hot water pump is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the pump and low vibration noise.
3. The shaft seal of the hot water booster pump adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively increase the service life of the mechanical seal.
4. The installation and maintenance of the hot water booster pump are convenient, without the need to disassemble the pipeline system. Simply remove the pump coupling nut to extract all rotor components.
5. The hot water booster pump can be operated in series or parallel according to the requirements of flow rate and head.
6. The hot water booster pump can be installed vertically or horizontally according to the requirements of pipeline layout.