Side wall exhaust fanIt is a propeller type low flow side wall exhaust fan. His blades can be made for wing shaped aluminum impellers, providing higher output pressure while reducing fan noise. The motor of the fan can be configured with explosion-proof, ordinary, high-temperature resistant, and moisture-proof motors, making the fan suitable for harsh environments. This fan comes standard with a through wall box and accessories such as a 90 degree rainproof passport and protective net, allowing for easy installation in one step.

　　

　　Side wall exhaust fanIt is a common anti-corrosion fan installed on the roof, belonging to a special type of axial flow fan in the category of axial flow fans. It is manufactured according to the standard of steel roof axial flow fans and works on the same principle as axial flow fans. It is widely used as the main equipment for air supply and exhaust in petroleum, chemical, textile, metallurgical, power plants, machinery factories, laboratories, warehouses, pharmaceuticals, food processing and other factories and mines. The roof axial flow fan is composed of a casing, motor, base, rotor, and cap made of fiberglass. The air volume is lower than that of the fiberglass roof axial flow fan, and the pressure is higher than that of the axial flow fan. Suitable for ventilation and air exchange in large warehouses, workshops, laboratories, schools, and other places, with an ambient gas temperature of less than 60 degrees Celsius and a dust content of less than 150 milligrams per cubic meter.

　　

Side wall exhaust fans are widely used in civil buildings such as hotels, restaurants, shopping malls, office buildings, and sports centers for ventilation and air supply through pipelines, as well as in ventilation and air exchange areas of industrial and mining enterprises. Ensure good airflow distribution and stable pressure holding at the outlet. The performance of the fan should be checked according to the performance table. The performance listed in the table is within the maximum rate range, divided into six performance points according to flow rate. When selecting, the performance table should be followed. It is not allowed to add the weight of the pipeline to the components of the fan, and it should be checked whether there are tools or other objects falling into the fan. The diagonal flow fan can be used for different purposes. When installing the fan, attention should be paid to maintaining the horizontal position of the fan. The connection between the fan and the foundation, as well as the connection of the air outlet duct, should be adjusted to be natural and not forcibly connected.