Dear customers and partners:

Hello!

We sincerely invite you to visit our booth W2724 at the 28th China International Adhesive and Sealer Exhibition (ASECHINA) in 2025 to explore the latest testing technologies and solutions in the adhesive industry.

This exhibition will be held from September 17th to 19th, 2025 at the Pudong New International Expo Center in Shanghai. As a UFI certified industry event, ASECHINA has always been committed to integrating the entire industry chain resources of adhesives, sealants, adhesive tapes, and films, promoting industry innovation and sustainable development.

At the Hegong booth (W2724), you will gain a deeper understanding of our complete laboratory titration analysis and moisture detection solutions developed for materials such as polyurethane, epoxy resin, and acrylic resin, including:

-Application of titration analysis:

Focusing on the three core areas of polyurethane, epoxy resin, and acrylic resin, the AT/CT/MT potentiometric titration series instruments can accurately detect key indicators such as NCO, hydroxyl value, acid value, amine value, inorganic chlorine, easily saponifiable chlorine, and hydrolyzed chlorine, laying a solid first line of defense for product quality. Whether it is the determination of NCO in polyurethane prepolymers, the determination of NCO content in MDI, or the determination of epoxy value in epoxy resin E51 and acid value in acrylic resin, all can be efficiently and accurately completed.

-Moisture detection plan:

withInternational recognitionBased on the Karl Fischer method, we provide volumetric methods (AKF-V6, AKF-V1), coulombic methods (AKF-C6, AKF-3N) Karl Fischer moisture meters, and cartridge heating furnace moisture measurement systems (integrated AKF-CAS6, split AKF-IS2020V, etc.). It can cover various samples from liquid polyether polyols, butyl acrylate, to paste like silicone sealants, solid polypropylene films, etc., accurately detecting trace moisture content as low as 1ppm.

-Compliant with multiple international and domestic standards, such as ISO21627, GB/T12008.3, ASTME1899, GB/T6283, etc.

Test results of some common application solutions:

1、 This experiment was tested using the CT-1Plus automatic potentiometric titrator, and the NCO content of the polyurethane prepolymer sample was approximately 6.29%.

2、 The NCO content of MDI (CDMDI-100H) was determined to be approximately 28.40% using the CT-1Plus automatic potentiometric titrator in this experiment.

3、 This experiment used an MT-V6 automatic potentiometric titrator to test the inorganic chlorine content of epoxy resin, which was approximately 0.2863ppm.

4、 In this experiment, the epoxy value of an epoxy resin E51 was determined to be approximately 0.5366mol/100g using an MT-V6 automatic potentiometric titrator.

5、 This experiment used the AKF-V1 Karl Fischer moisture analyzer to determine the moisture content in polyether polyols by direct injection, which was approximately 539.7 ppm

6、 This experiment measured the moisture content of a certain TPU material to be approximately 740.7ppm using an AKF-CH6 Karl Fischer moisture analyzer.

7、 This experiment used an AKF-CH6 card type heating furnace moisture analyzer to measure the moisture content of the silicone sealant series materials, which was approximately 0.4587% for the powder, 0.0564% for the base material, and 0.0764% for the finished adhesive.

8、 This experiment used the AKF-CAS6 multi station automatic injection Karl Fischer moisture analyzer to measure the moisture content in a certain epoxy resin sample, which was approximately 86.3ppm.

For more detailed configuration quotations and application plans for materials such as adhesives, sealants, and films, please consult the Shanghai Hegong Department of Commerce

Our technical team will demonstrate instrument operation on-site, share industry application cases, and provide customized testing solution suggestions. Whether you are from a research and development, quality control, or production management position, you are welcome to come and exchange ideas to jointly improve product quality and process level.

Looking forward to meeting you in Shanghai in the golden autumn of September! Your arrival will be a great honor for us, and we will wholeheartedly provide you with high-quality services and professional answers.

Exhibition information:

Date: September 17-19, 2025

Location: Shanghai Pudong New International Expo Center

Booth Number: W2724

Best regards,

Shanghai Hegong Scientific Instrument Co., Ltd