pneumaticglobe valvePurpose and characteristics:
　　
1globe valveOnly for the operation of fluid media on pipelines or equipment that are fully open or closed, and not allowed for throttling purposes.
　　
2. The opening or closing stroke of the valve stem is relatively short, and it has a very reliable cutting action.
　　
3. In the fully open state, there is no longer contact between the valve seat and the sealing surface of the valve disc, and the mechanical wear of the sealing surface is less.
　　
4. When fully closed, the handwheel rotates clockwise.
　　
5. It can be installed at any position in the pipeline, with the medium flowing from bottom to top.
　　
6. Stainless steel globe valves are suitable for pipelines with various corrosive media, and have good corrosion resistance and sufficient strength.
　　
7. Alloy steel globe valves are suitable for high-temperature resistant steam and oil pipelines and have high temperature resistance characteristics.
　　
8. Drive modes: manual, electric, pneumatic.
　　
9. Accessories available: solenoid valve, air source processing triad, handwheel, etc.