HBzhan Content Introduction: Under design conditions, high-pressure fans with wind pressures ranging from 30kPa to 200KPa or compression ratios of e=1.3~3 belong to the category of high-pressure fans. Currently, in the industry, air ring vacuum pumps are generally classified as high-pressure fans. High pressure fan, also known as high-pressure blower, is different from general centrifugal blower fans.
　　
Normally,high-pressure blowerHas the following characteristics:
　　
1. It has dual functions of blowing and suction, and can be used for both suction and blowing;
　　
2. Running with little or no oil, the output air is clean;
　　
3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;
　　
4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;
　　
5. Compared to similar fans, it operates with lower noise and introduces the * type high-pressure fan:
　　
6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;
　　
7high-pressure blowerThe mechanical wear is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal use conditions, 3-5 years is * no problem;
　　
8. Easy to install and use!
　　
With the continuous development of economy, science and technology, we are constantly introducing new technologies and processes. High pressure fans have been widely used in industrial equipment, equipment manufacturing, civil equipment and other fields.
　　
1. Textile equipment: high-pressure fan, high-speed sock weaving machine; Coating thickness control and ensuring uniform thickness, removing moisture, drying, and yarn drawing machine. 2. Plastic auxiliary equipment and central feeding system: In the use of the casting machine, in order to ensure high-speed production and uniform casting film, the air knife on the cooling roller forms a thin layer of air between the film and the surface of the cooling roller, and the high-pressure fan cools the film evenly; Simultaneously used for real feeding, drying, dehumidification, and central feeding system of injection molding machines.
　　
3. Computer monitors, LCD monitors, printed circuit boards, and other products can be used in printed circuit board equipment such as high-pressure fan cleaning, water cutting, and drying. 4. In wire and cable equipment, it can remove moisture, oil, dry, and suppress static electricity, such as removing water from precision copper pipes for air conditioning.
　　
5. Effective control of coating thickness and ensuring uniform thickness in painting equipment; Can dry, remove moisture, dry at high temperatures over a large area, and control coating thickness; After electroplating, metal surface treatment such as cutting, drying, and degreasing. 6. High pressure fans are used for pneumatic conveying of cans; The use of cutting water, drying, and other food and beverage filling equipment before coding or labeling beverage bottles, cans, and various packaged foods.
　　
7. Printing equipment: screen printing machinery; UV polishing machine, instant drying of ink within 1-5 seconds after printing. 8. Air treatment equipment that can be used for the collection, purification, and recycling of toxic and harmful gases; Gas detection equipment for atmospheric environment.
　　
9. Specially suitable for cleaning equipment such as ultrasonic cleaning machines, PCB board cleaning and drying machines in the electronics industry, tunnel type car cleaning machines (car washing machines), commercial dishwashers, glass cleaning machines, etc. 10. High pressure fans can be used for surface aeration, oxygenation, oxygenation grids, and oxygenation systems in fish farming.
　　
11. Used in tires and rubber equipment, it can remove moisture/oil, dry, and suppress static electricity.
　　
Machinery Co., Ltd. Mainland Branch Electromechanical Equipment Co., Ltd. specializes in the design, research and development, and production of various high-tech planetary reducers, reduction motors, spiral gear reducers, and worm gear reducers. In recent years, we have been shouldering customers' pursuit of product quality and price, constantly making unremitting efforts in improving the high performance of reducers, maximizing efficiency, and providing a wide range of technical resources.