wonifengFilter cotton is an important component of the paint booth, and the replacement and installation of filter cotton in the paint booth are also extremely important. Many incorrect installations can cause damage to the filter system and secondary pollution.Shanghai Woni Wind PurificationHere we introduce the correct installation method for the filter cotton in the paint booth. You can remember these important steps to ensure that replacement does not cause secondary pollution.

Step by step, the replacement of the filter cotton in the paint baking room should be carried out first by removing the roof cotton, air vent cotton, and floor cotton of the paint baking room. After completing the removal of the air inlet, top, and bottom filter screens, the dark corners of the paint baking room should be cleaned carefully, and the accumulated dust and other attachments should be cleaned thoroughly.

Step 2, close the paint baking room door to create a sealed space, turn on the fan switch, increase the air volume, and let the air in the paint baking room blow for 5 minutes to remove the moisture and dust in the passage.

Step three, install a new filter cotton. When installing the filter cotton, be sure to cover the seam of the filter screen. The filter cotton should be placed flat on the filter frame, and sealant should be applied if necessary to ensure that the seam will not leak.

Vani WindThe canopy filter cotton is used in the air supply system of painting factories, paint spraying rooms, and painted roofs to collect small dust particles, prevent paint pollution, ensure high air cleanliness in the room, and evenly distribute air flow in the paint spraying room.

1. The filter material is made by non-woven, multi-directional, and gradient methods according to the fiber thickness and density, using the needle rolling method

2. The gradually denser structure can be blocked at different density levels according to the size of dust particles, with a large dust holding capacity

3. Can still maintain its original shape at a certain wind speed, increase the lifespan of the filter, and reduce replacement costs

4. Made of composite fibers with different melting points inside and outside, the joints between fibers are firm, tightly bonded, and not easily detached

5. The filter cotton can be selected from fully adhesive (three-dimensional spray treatment), semi adhesive (surface spray treatment), and non adhesive (non adhesive). 6. It can be equipped with galvanized steel plate frame or aluminum alloy frame, and can also be equipped with metal back mesh, which can effectively support the filter screen to withstand high wind volume and is not easily deformed. Common specifications and performance parameters

Step four, after all installations are completed, turn on the switch and blow it empty again for about 5-10 minutes. After a simple cleaning, install the cotton pad and it can be used.