Laminar flow hood is one of the devices that can shield and isolate operators from products, and its main purpose is to avoid product contamination. The air drawn from the clean room is then passed through using a fan installed in the top pressurized compartmentHEPAFilter vertically through the operating area to provide ISO 5 (level 100) unidirectional airflow for critical areas. The exhaust gas is discharged from below and returned to the clean room area. It mainly consists of a box, a fanEfficient air filterComposed of damping layer, lighting fixtures, etc.

Function:

A laminar flow hood is composed of a box, a fan, a high-efficiency air filter, a damping layer, lighting fixtures, and other components. It can isolate the product to avoid pollution, and can also draw clean air from the clean room. The clean air is placed in the applicable area through the fan, and finally the exhaust gas is discharged from below. Compared with a separate clean room, laminar flow hood is more effective, easier to operate, and requires lower prices. It not only has lower requirements for factory construction, but also saves energy and electricity. It is the most commonly used in precision machinery, electronics, pharmaceuticals, food, fine chemicals and other departments

The laminar flow hood has relatively low environmental requirements for use, so this type of clean equipment is currently popular in the market. The cleanliness level can reach the requirements of level 1000 to level 10, with an average wind speed of 0.35-0.54m/s and a noise level of less than 65dB (A). It can be used as long as it is powered by 220V50HZ, and has a high cost-effectiveness.

It can be installed during the renovation and renovation of new cleanrooms and cleanrooms, making it more effective when used in conjunction with cleanrooms. Not only is it cost-effective, but it is also very easy to maintain, which can improve cleanliness levels, reduce noise and vibration, and lower costs. Installation and maintenance are also very convenient.