-
E-mail
yztpdq@yztpdq.com
-
Phone
15366862628
-
Address
No. 2 Guotai Road, Baoying County, Jiangsu Province
Yangzhou Top Electric Technology Co., Ltd
yztpdq@yztpdq.com
15366862628
No. 2 Guotai Road, Baoying County, Jiangsu Province
Instrument Overview
Reactive power compensation capacitors are important equipment for achieving reactive power balance in power systems. In recent years, reactive power issues have received widespread attention from the power sector, and complete sets of reactive power compensation devices have been widely deployed in distribution networks. The power supply requires real-time balance between active and reactive power in the system. Therefore, reactive power compensation devices should meet the requirements of automatic tracking and real-time compensation, which inevitably requires frequent switching of reactive power compensation capacitor banks. The switching operation of the capacitor bank will generate overcurrent and overvoltage impact, causing damage to the capacitors.
To ensure the reliability of the equipment, early detection of capacitor defects and avoid the expansion of faults require regular testing. On site, capacitors are all connected in parallel in groups. The traditional method is to remove the capacitor busbar and use an old-fashioned capacitance meter for measurement. Due to the fact that the capacitor group is composed of dozens to hundreds of small capacitors, the workload of measuring capacitance by disconnecting the wires is very large. Moreover, frequent disconnection can cause screws to slip or not be tightened, leaving safety hazards and easily causing secondary damage to the capacitors. Therefore, it is highly desirable to have a testing instrument that can measure the capacitance of various small capacitors without disconnecting wires, reducing the burden on maintenance personnel, improving the efficiency of maintenance work, and enhancing the safety of distribution network operation.
The fully automatic three-phase capacitance and inductance tester launched by Yangzhou Topu Electric Technology Co., Ltd. can measure the single-phase capacitance of grouped parallel capacitors or various types of three-phase capacitors connected in combination without disconnecting the wires. At the same time, it can also measure the inductance of various reactors. This instrument can also measure the current under power frequency conditions. The instrument is easy to connect and operate, reducing the workload of maintenance personnel, greatly improving the testing efficiency on site, and providing safety guarantees for the normal operation of the power grid.
Functional Features
1. The three-phase capacitance and inductance tester can measure the single single-phase capacitance of a group of parallel capacitors and simultaneously measure the three-phase capacitance of various connection types without disconnecting the wires. At the same time, this instrument can also measure the inductance of various reactors and can be used as a power frequency current tester, with one machine for three purposes, meeting various on-site needs.
2. During measurement, this instrument can display not only the measured capacitance or inductance values, but also the measured voltage, current, power, frequency, impedance, phase angle, and other data, in order to better analyze the quality of the test sample.
3. The instrument adopts a 240 × 128 large screen with backlight LCD display, which can be clearly observed during the day and night. The Chinese menu prompts are easy to operate.
4. The instrument comes with a high-speed micro thermal printer that can print measurement and historical data.
5. The instrument is equipped with a large capacity non-volatile memory that can store 50 sets of measurement data.
6. The instrument is equipped with a high-precision real-time clock function that allows for date and time calibration.
7. Overcurrent protection function of instrument test power supply: Short circuit of power output will not damage the instrument.
technical parameters
1. Output voltage:~2V,~20V
2. Output current: ≤ 10A
2. Measurement range: capacitance: 0.1 μ F to 2000 μ F
Inductance: 0.1mH-10H
Current: 1mA~10A
Voltage: 0-25V
3. Measurement accuracy: capacitance: ± (2%+2 words)
Inductance: ± (2%+5 words)
Current: ± (2%+2 characters)
Voltage: ± (2%+2 words)
4. Working power supply: AC 220V ± 10%
5. Power frequency: 50 ± 1Hz
6. Instrument power: 200W
7. Environmental temperature: -10 ℃ to 50 ℃
8. Environmental humidity: ≤ 85% RH
Top Electric's main equipment:
Complete set of equipment for frequency conversion series resonance test, DC high voltage generator, SF6 gas micro water meter, SF6 gas leak detector, SF6 gas purity tester SF6 gas comprehensive tester, SF6 density relay calibrator, test transformer (power frequency withstand voltage test device), frequency conversion anti-interference high-voltage dielectric loss tester, triple frequency generator (induction withstand voltage test device), double frequency generator set, AC/DC voltage divider (high voltage measuring instrument), high current generator (converter), transformer DC resistance tester, transformer ratio tester, transformer capacity characteristic tester, transformer no-load short circuit tester, transformer on load tap changer tester, transformer winding deformation tester, transformer characteristic comprehensive testing platform, transformer core grounding current tester, microcomputer relay protection tester, transformer characteristic comprehensive tester (transformer volt ampere characteristic tester), high-voltage switch mechanical characteristic tester (circuit breaker characteristic tester) Testing equipment) Circuit resistance tester (contact resistance tester), zinc oxide lightning arrester tester, transmission line parameter tester, capacitance and inductance tester, grounding resistance tester, insulation resistance tester (megohmmeter), insulation oil dielectric strength tester (insulation oil withstand voltage tester), insulation oil chromatograph, insulation boot (glove) withstand voltage test device, power safety tool testing equipment, battery constant current discharge tester, mining cable fault tester, mining power detection equipment, high-speed rail system power detection instrument, oil analysis instrument, intelligent solar photovoltaic junction box testerVacuum oil filterElectric heating appliances, insulation products, etc.
Information organization: Yangzhou Topu Electric Technology Co., Ltd
