10kA car charging interface limited short-circuit current withstand test system

10kA car charging interface limited short-circuit current withstand test system

Equipment model: Sun-10kA

Production unit: Shenzhen Sunshine Yueda Technology Co., Ltd

1、 Standard Overview:

The short-circuit current withstand test for the AC charging interface of electric vehicles shall meet the following standards:

GB/T 20234.1-2023 "Connection devices for conductive charging of electric vehicles - Part 1: General requirements";

GB/T 20234.4-2023 "Connection devices for conductive charging of electric vehicles - Part 4: High power DC charging interface"; GB/T 11918.1-2014 "Industrial plugs, sockets and appliance couplers - Part 1: General requirements";

II Main technical parameters:

1. Working power supply: two-phase AC380V 50HZ;

2. Rated capacity: 5KVA;

3. Rated output voltage: AC 0-320V;

4. Maximum DC charging voltage 450V;

5. Rated output current: AC 0-10.0KA impulse current power factor 0.95-1.

III Test description:

The socket and matching plug should be able to withstand an expected short-circuit current of at least 10kA or a higher value specified by the manufacturer.

Rated value and test conditions:

The short-circuit protection device should be a "gG" type fuse that meets the requirements of GB13539.1-2008 and GB13539.2-2008 for general use and has the same rated value as the socket and matching plug.

The deviations used during the experiment are as follows:

Current: 95%~105%;

Voltage: 100%~105%;

Frequency: 95%~105%.

4、 More equipment information:

Sincerely thank you for clicking on this webpage to view and learn about our 10kA limited short-circuit current withstand test system produced by Sunshine Yueda10kA car charging interface limited short-circuit current withstand test system，If you would like to learn more about GB/T20234.1-2023，GB/T20234.4-2024，GB/T18487.1-2023，GB39752-2024,GB44263-2024 We welcome you to call or write to us at any time to communicate and learn about relevant standard testing equipment;

4 After-sales service

After the final acceptance by the buyer, the quality assurance period is 12 months. In order to ensure the effectiveness and normal use of the contracted equipment, the seller shall not only bear the obligations of installation, commissioning, acceptance, and training, but also continue to provide technical support to the buyer, including equipment maintenance and technical guidance outside the warranty period, and supply of accessories.