20 cubic meter chemical storage tank price anti-corrosion storage tank

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The price of a 20 cubic meter chemical storage tank is applied to the storage and transportation of secondary water supply, water storage, water treatment and purification equipment for high-rise buildings, industrial cooling water, chemical preparations, chemical raw materials, various oil products, beverages, urban, agricultural, rural rooftop water storage, and water storage and distribution containers for hotels and restaurants. It has the advantages of safety, convenience, and no maintenance required

Product Details

20 cubic meter chemical storage tank price

The barrel body is made of imported PE raw material and molded in one roll molding process. Tough texture, convenient movement, impact resistance, corrosion resistance, anti-aging, and long service life.

Due to the large volume of plastic cans, special attention was paid to adjusting the thickness of the product wall during production. The pressure during product use is mainly at the bottom, and the lower body of the can body is reasonably thickened. The product is reinforced with plastic reinforcement ribs and designed to surround the reinforcement ribs.

The maintenance cycle of storage tanks is generally:

Medium repair takes 60-120 days, major repair takes 12 months.

Intermediate repair: eliminate running, emitting, dripping, and leaking

20 cubic meter chemical storage tank priceNotes:

1. Storage tanks for flammable gases and liquids should be equipped with necessary fire-fighting equipment. Smoking, open flame lighting, heating, and bringing their ignition sources into the tank area are strictly prohibited.

2. For storage tanks storing flammable, explosive, toxic, corrosive and other media, relevant regulations on hazardous material management should be strictly implemented.

3. Before tank inspection and repair, the power supply of electrical equipment related to the tank must be cut off, and equipment handover procedures must be completed.

4. After the medium inside the storage tank is drained, the inlet and outlet valves should be closed or blind plates should be added to isolate the pipelines and equipment connected to them, and clear partition signs should be set up.

5. For storage tanks containing flammable, corrosive, toxic, or suffocating media, they must undergo replacement, neutralization, disinfection, cleaning, and other treatments, and be analyzed and inspected after treatment. The analysis results should meet the requirements of relevant specifications and standards. It is strictly prohibited to replace flammable media with air.

6. A permit for working inside the tank must be obtained. Due to prolonged interruption of work, a new work permit for the tank should be issued.

7. Thirty minutes before entering the tank for operation, a sample should be taken for analysis, with an oxygen content between 18-23% (by volume).

8. When entering the tank to clean toxic and corrosive residues, it is necessary to wear personal protective equipment.

9. The scaffolding and lifting devices that need to be erected must be firm and reliable, and throwing materials and tools inside and outside is strictly prohibited during operation to ensure safe operation.

10. The lighting inside the tank should use explosion-proof lamps with a voltage not exceeding 24 pairs.