-
E-mail
2153283961@qq.com
- Phone
-
Address
No. 16 Xinggu Road, Guli Street, Jiangning District, Nanjing City, and No. 5 Xiongfeng West Road, Xiongzhou Street, Liuhe District, Nanjing City
Product Categories
Jiangsu Qifeng Electric Manufacturing Co., Ltd
304 stainless steel PLC soft start control cabinet
NegotiableUpdate on 05/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Jinling Qifeng 304 stainless steel PLC soft start control cabinet is mainly used for starting various high-power motors. It replaces traditional starting methods with soft start to achieve smooth starting, reduce starting current, minimize the mechanical impact of large currents on the motor and the power grid during motor starting, improve power quality, and save energy.
Product Details
Product · Advantages
Product advantages
-
-
01Multiple protection functions
The PLC soft start control cabinet has input overvoltage/undervoltage protection, input instantaneous power failure protection, input phase loss protection, output short circuit protection, output phase loss protection, overload protection, control system overheating protection, permanent magnet motor stall/stall protection, and permanent magnet motor overvoltage/undervoltage protection.
02Cabinet protection level: IP55
PLC soft start control cabinetDue to the high level of dust in the usage environment, an integrated cabinet structure is adopted, which has the ability to prevent dust and splash water.
-
Composition structure:
- •Air switch, Jinling Qifeng PLC, power supply, relay, wiring terminal.
-
Component brand:
- •Main brands: ABB, Siemens, Mitsubishi, Fuji, Schneider, etc.
-
Usage conditions:
- •Power supply conditions: System rated voltage: 3-phase 380/400 V ± 10%; Rated frequency of the system: 50Hz ± 2Hz;
- •Installation and environmental conditions: altitude: 0 to 1000m (reduced capacity is required for use above 1000m); Operating temperature: -10 ℃ to+50 ℃; Relative humidity: 5% to 95%; Cooling method: forced air cooling; Protection level: IP23;
- •Technical parameters: Output voltage: 3-phase 0 to 360~380V; Rated power: 210KW; Rated current: 450A; Output frequency: 0 to 300Hz; Overload capacity: Rated output current of 200%, 1min; Efficiency: ≥ 98%; Voltage total harmonic distortion rate: rated capacity of frequency converter:<5%; Not less than 315KVA, within the range of du/dt transmission cable length less than 300m, du/dt ＜ 1000V/μ s, lower control frequency ＜ 0.5Hz (no position sensor vector control), speed control accuracy 2% zero speed start/overload torque ＞ 1.8Tn, lasting for 30 seconds.
Product · Real time shooting
PRIDUCT PHOTOGRAPH
Strength · Manufacturer
STRENGTH FACTORY
— Applicable Scope—
Scope of application
— Honor and Certificate—
Certificate of honor
Obtained ISO9001 certification for quality assurance3·15Integrity Enterprise Honor. Simultaneously obtained products from Jiangsu Provincequality5AHonored as a top tier brand enterprise.
— Product Certification—
CERTIFICATE OF HONOR
More product certification certificates
— Collaboration · Partners—
COOPERATIVE PARTNER
