685 * 98 * 1090 quick dust removal filter plate

685 * 98 * 1090 quick dust removal filter plateThe basic filtering parameters are as follows:

Filtering accuracy and efficiency

• The basic filtering accuracy is 1-5 μ m, suitable for metal processing, woodworking and other scenarios; The PTFE coated version has a filtration accuracy of up to 0.3 μ m and a filtration efficiency of ≥ 99.99%, which can intercept graphite dust during lithium battery electrode processing. The filtration efficiency of PTFE coated filter cartridge for 0.3 μ m dust is ≥ 99.9%, breaking the interception limit of traditional filters.

• It can filter solid particles with a particle size of 0.1 μ m-100 μ m in dusty air to the target concentration, usually ≤ 50mg/m ³, and ≤ 10mg/m ³ under low emission requirements.

Dust holding capacity and lifespan

The dust holding capacity is 5-8kg/㎡, and the continuous operation life is 8000-12000 hours. It is recommended to replace it after 6 months in high concentration dust environments.

Pulse blowback parameters

• Spray pressure: directly affects the cleaning effect, generally 0.4-0.7MPa, and high concentration dust should be ≥ 0.5MPa.

• Spray cycle: Set to 5-30 minutes based on dust concentration, and shorten to 5-10 minutes in high humidity environments to avoid excessive spray damaging the filter material.

Breathability and Energy Efficiency

The air permeability is 8-15m ³/(㎡· min), the resistance is reduced by 30% compared to deep filtration materials, and the energy consumption of the fan is saved by 15%.

Environmental adaptation parameters

• Temperature resistance: -50 ℃~260 ℃ (depending on the material).

• Acid alkali resistance: pH range is 2-14.

• Anti static: Surface resistance ≤ 10 ΩΩ.

Gu'an Intelligent Filter Xingchen Filter Equipment Co., Ltd

685 * 98 * 1090 quick dust removal filter plateIt also has the advantages of corrosion resistance, pressure resistance, strong dirt holding capacity, strong adsorption, low probability of blockage, high fire resistance, strong moisture resistance, repeated cleaning, good sealing effect, strong tear resistance, long service life, and low price. The application of polyester long fiber filter material not only endows the dust removal filter cartridge with good acid and alkali resistance, higher filtration efficiency, and lower operating resistance, but also has incomparable wear resistance, high strength, and durability compared to traditional filter materials. Pulse blowback and other methods are easier to clean the dust, and it can be repeatedly cleaned with water without damaging the filter material, extending its service life. The filtration accuracy can reach 1 μ m, and the filtration efficiency can reach 99.99%.