800 centrifuge

800 centrifuge

The SS800 centrifuge has a bucket diameter of 800mm, a large capacity of 120 kilograms, a speed of 1200 revolutions per minute, a motor power of 5.5kw, a total weight of approximately 1200 kilograms, and external dimensions of approximately 1800 * 1600 * 1100

Structural characteristics of three legged centrifuge
1. Industrial centrifugal dewatering machines are all equipped with a three legged suspended pendulum structure, which can effectively reduce the foot vibration caused by the unbalanced load inside the hub during operation.
2. The shell and top cover are made of high-quality stainless steel, the cage base and chassis are made of cast iron material, and the water outlet pipe is located below the chassis.
3. The spindle is made of high-quality steel that has undergone heat treatment and precision machining.
4. The transmission part adopts triangular tape transmission, and the centrifugal starting wheel is directly driven by the motor, which can slowly start the machine and gradually reach the design speed to ensure smooth operation of the machine.
5. There is a brake opening and closing arm inside the machine, which has good braking performance and can quickly stop the machine.

Centrifuge operation method

1Place the machine on a level surface, ensuring that the ground is level and even. The power connection method is delta connection. After connecting the power, test the machine once to ensure that the inner container rotates clockwise.

2Place the filter bag inside the inner container, lay it flat, and ensure that the filter cloth is tightly attached to the inner container wall.

3Place the material that needs to be dehydrated evenly and smoothlyLinerInside, pay attentionlevelUniformThe loading amount must not exceed the larger capacity of the machine.

4Start the machine and reach a high speed in about 30 seconds. If the machine vibrates significantly during this process, immediately disconnect the power and check if the material is flat and uniform. After the machine reaches a high speed, a large amount of liquid is discharged from the drain pipe. After about 2 minutes, the material is basically dry and there is almost no liquid flowing out of the drainage pipe. The power can be turned off. After 1 minute, apply the brake and do not brake it all at once.

5After the machine comes to a complete stop, remove the material and re lay the filter cloth in the inner tank to proceed with the next dehydration process.

6Never put materials into the machine during operation to prevent the high-speed rotating drum from throwing materials out and injuring people.The brake should not be applied all at once, but should be applied several times to stop the machine.

Customer Case

3towerSS800Centrifuge sent to Hebi, Henan

On August 5th, 2014, the three SS800 centrifuges ordered by Manager Hu from Hebi, Henan have been shipped!

The inner diameter of the SS800 centrifuge is 800mm, the motor power is 5.5kw, the speed is 1200 revolutions per minute, the larger volume is 120kg, the overall weight is about 1200kg, the external dimensions are about 1800 * 1600 * 1100, and the material is 304 stainless steel.

SS800Centrifuge ordering news

On October 2, 2014, Manager Dong from Xixian County, Nanyang, Henan Province ordered one SS800 model three legged centrifuge from our company, also known as three legged centrifuge, industrial centrifuge, stainless steel centrifuge, centrifugal dewatering machine, etc. The configuration is as follows: motor power of 5.5kw, large capacity of 115kg, speed of 1200rpm, inner liner wall thickness of 4mm, outer shell wall thickness of 2mm, and total weight of approximately 1200kg. The company has arranged production and is expected to ship on October 8th.

Three legged centrifuge purchase news

2014year2the moon12On [date], our company signed a purchase contract for a three legged centrifuge with Manager Yuan from the Dalian branch of a special lubricant company in Shanghai. The model isSS800The production period is2After one working day, the company will arrange for shipment.

The inner diameter of this centrifuge model is800mmThe rotational speed is1200Rotating per minute, explosion-proof motor power5.5kwThe material is304Stainless steel, with a larger volume of120kg.

Order Notice for Tripod Centrifuge

2014year3the moon28On the day of, Manager Zhang from Zhoucun, Xinxiang City, Henan Province purchased a three legged centrifuge from our company, model:SS800, inner liner diameter800mm, rotational speed1200Conversion per minute, no foundation,304Material, loading weight limit110kgThe total weight of the machine is approximately1200kg.