AO-203 Wall mounted Vibration Monitoring and Protection Instrument

NegotiableUpdate on 03/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The AO-203 wall mounted vibration monitoring and protection device has power on and off detection functions, while cutting off the alarm and shutdown output circuits, which can effectively suppress instrument false alarms

Product Details

AO-203 Wall mounted Vibration Monitoring and Protection Instrument
Functional Description
NE9852The bearing vibration monitor is a dual channel intelligent instrument based on DSP processor.

The setting of parameters is achieved throughNE9000Configuration software completed.

1）Normal observation operations can be completed through the dashboard keyboard.

The following functions are provided as standard:
AO-203 Wall mounted Vibration Monitoring and Protection InstrumentThe instrument functions can be programmed as follows:
Two channels work independently: each channel measures separately, and the two channels do not occur;

Two channel monitoring of the same parameter: Two channels measure the same parameter, which can achieve high reliability measurement and other functions;
Warning of monitoring values, identification of danger exceeding limits, status indication, and output;
Each channel provides programmable output voltage or current signals to recorders, etc;
The alarm control output logic of the instrument is programmable:
Or "logic──Any channel experiences a super relay action;

The logic of 'and'──Both channels experience super relay action;
The four control relay functions of the instrument are programmable and can be selected to interlock or not. Each relay can be configured as one (or two) channel warning, positive warning, negative warning, danger, positive danger, negative danger, and other functions as needed;
Instrument parameters and data are stored in E²PROM can be stored in case of power loss.
NE9852Bearing vibration monitoring device with complete self inspection and self diagnosis functions:
- The processor performs a self check on the instrument measurement circuit at regular intervals, depending on the working condition of each channel measurement circuit of the instrument
In the event of a circuit malfunction, it will automatically bypass and shut down from operation;
An OK circuit is provided to monitor the normal operation of each sensor and its cables. In the event of a fault such as disconnection or short circuit in a sensor coil, the hazard control output of that channel is automatically disabled to prevent relay misoperation from causing the unit to shut down incorrectly;