Acid mist purification equipment

Acid mist purification equipmentAlso known as acid gas purification tower, acid mist absorption tower, waste gas purification tower, and fiberglass acid mist purification tower, it plays a role in removing harmful gases from waste gas and has the characteristics of wide applicability, high purification efficiency, low equipment resistance, and small footprint.

Structure of acid mist purification equipment:

（1）Composite fiberglass storage tank and filling pipe, with a filtrate device added to the suction pipe, and the inlet section made of composite fiberglass.

（2）The spraying section adopts a rowY-1Nylon nozzle, Paul ring filter material, and organic glass inspection hole.

（3）The effective water blocking section is equipped with a swirl plate to enhance the water blocking effect.

（4）Fiberglass hood cover.

（5）F4-72FRP centrifugal fan

（6）Plastic water pump or stainless steel centrifugal pump.

（7）Other accessories such as plastic pipe fittings, valves, fixed brackets, maintenance ladders, and air inlet ducts can be customized by users when ordering.

Acid mist purification equipmentPrinciple and schematic explanation of purification sequence process

Suction hood → inlet duct → fan (or inlet section) → inlet section of filter material layer (first stage neutralization reaction section) → stage of filter material layer (stage neutralization reaction section) swirl plate → outlet cap cover → exhaust duct (or inlet section fan)

Precautions for using acid mist purification equipment:

1Adjustment of circulating water volume: It is determined by the spray tower water supply pump. When one boiler is running, one can be turned on. When two or three boilers are running simultaneously in winter, both water pumps should be turned on. The flow rate of the mud pump should be adjusted according to the flow rate of the circulating pump to make it equal.

2Dosing amount in the dosing tank of the acid mist purification equipment: When running a boiler, add alkali2Bag, add hydrated lime5When operating two or three bags in winter, the dosage can be increased by a corresponding multiple.

3The sedimentation tank of acid mist purification equipment should be cleaned regularly, once a week in summer and once every three days in winter.

4When discharging from the grey water separator, discharge once per shift and open the discharge valves separately until clear water is discharged.

5The above rotating components should be regularly inspected and oiled, and any faults should be promptly eliminated to ensure the desulfurization effect of the spray tower.

6When adding medication up and down stairs, it is important to have a sense of self security and mutual security awareness.

7After the work is completed, it is necessary to clean up the area in a timely manner and ensure that the site is clear when people leave.

Acid mist purification equipmentUse case:

Below is the installation of acid mist purification equipment by Huakang Environmental Protection for Shijiazhuang Pharmaceutical Factory. Huakang Environmental Protection has designed a reasonable dust removal device based on the composition of the exhaust gas emitted by the pharmaceutical factory to ensure compliance with emission standards.