Activated carbon waste gas adsorption and purification equipment

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The commonly used activated carbon in the exhaust gas treatment process of activated carbon adsorption purification equipment is granular or honeycomb shaped. Because activated carbon has a porous structure and a large surface area, when gas passes through activated carbon and comes into sufficient contact with it, pollutants are trapped near the pores, thus achieving the purpose of purifying the gas.

Product Details

Various organic waste gases, including hydrocarbons, alcohols, aldehydes, ketones, and amines, occur in industrial production. These exhaust gases come from a wide range of sources, including emissions from petrochemical and organic composition reaction equipment in the chemical industry, organic solvents in printing ink in the printing industry, odors from mechanical spray painting and metal products in the machinery industry, emissions from spray painting and dry furnace casting production equipment in the sedan industry, and emissions from spray painting equipment in hardware and furniture factories.

Activated carbon waste gas adsorption and purification equipmentActivated carbon adsorption can achieve the effect of purifying the air, which can adsorb toxic substances in the air, such as formaldehyde, and also remove a large amount of dust or dirt from the air. It can reduce toxic substances in the air and have a reducing effect on the harm caused to the body by air pollution.

Activated carbon waste gas adsorption and purification equipmentworkmanship

1. Activated carbon purifiers use pre-treatment methods such as water spray absorption, defogging, cooling, and bag filtration based on the physical and chemical characteristics of the components in the exhaust gas. The pre treated exhaust gas is then treated with adsorption to meet emission standards.

2. The saturated adsorbent material is subjected to steam thermal stripping to remove the solvent adsorbed in the adsorbent material, and then recovered and reused after condensation.

3. Adsorption desorption recovery is a comprehensive treatment method for low to medium concentration exhaust gas pollution, especially for substances in the exhaust gas that have recycling value and are easy to desorb, considering the recovery process.

4. The selection of adsorption materials for activated carbon fiber adsorption and desorption has low energy consumption, high proportion of pores in activated carbon pore size, large loading capacity of adsorption materials, and customizable resin pore size. The selection of adsorption materials is based on the physicochemical properties of the components in the exhaust gas and the characteristics of the adsorption materials. Choosing the appropriate adsorption material is the key to the treatment equipment.