Aeration fan for sewage pumping station

The HC series rotary aerator produced by our factory is a professional aeration fan used in sewage pumping stations. The aeration fan contains Japanese technology and hasSmall size, high air volume, low noise, low energy consumption, smooth operation, easy installation, minimal malfunctions, long lifespanSuch characteristics.
The product is widely used in:Water treatment blast aeration, sewage mixing aeration in hospitals and laboratories, vacuum paper feeding in the printing industry, electroplating cabinets, mixing aeration for industrial wastewater, plasticGas supply for welding and blowing, spray for burner, glass industry, central air conditioning spray and others.

The installation of aeration fans for this pump station model can refer to the general mechanical equipment installation specifications. In addition, the following items should be noted:

1 ：During installation, use a spirit level to calibrate the level, and use secondary grouting method for the foot screw mouth.
2 ：When installing, first check the body to confirm that there are no debris, then close the intake and exhaust ports, thoroughly remove rust and other debris from the pipes, and then connect to the fan. It is required that there is no air leakage at each interface.
3 ：A pressure gauge should be installed on the exhaust pipe to reflectRotary fanTo prevent overloading and damage to components, a safety check valve must be installed on the exhaust pipe for outlet pressure.
4 ：In order to ensure the safe operation of the rotary fan, the fan is not allowed to bear external loads such as pipes, valves, cabinets, etc. The secondary load must be supported by a means.
5 ：Install current and voltage meters in the circuit control system to observe the working status of the fan.

exhaust
caliber
（mm）

frequency
(HC-S)

fan
speed
(rpm)

V-belt pulley

Weight (kg)