Angular stroke electric actuator

Product Overview
The 3810R (3610R) series angular stroke fully electronic electric actuator is a fully electronic actuator that uses AC220 single-phase AC power as the driving power source and directly accepts DC4-20mA, DC0-10mA, or DC1-5V control signals from DCS, PLC systems, or regulating instrument operators to operate with angular displacement (0-90o). The hybrid integrated circuit used in the electronic control unit is designed in a box shape, including complete protection functions, which can be controlled on-site or remotely, and sealed with resin casting. The driving motor adopts an AC reversible motor, and the feedback detection adopts a high-performance conductive plastic potentiometer, which is a highly reliable and economical product with a resolution of 1/250. This actuator almost has various action transformation functions required for regulating itself, as well as opening signal functions and manual functions.

Product Features
1. The actuator is designed with a servo system (without the need for additional servo amplifiers), which only requires the connection of DC4-20mA (or DC1-5V) signal and AC220V single-phase power supply to operate Equipped with internal wiring terminals, the wiring is extremely simple and convenient.
2. The key component of the actuator - the controller, uses a hybrid integrated circuit sealed and cast with resin, with a box shaped appearance, small volume, and high reliability.
3. The feedback detection of the driving quantity adopts high-performance conductive plastic potentiometers with a resolution of<0.4%.
4. Equipped with self diagnostic function, when a fault occurs, the indicator light on the controller will immediately emit an indication signal.
5. The state selection switch can be used to set the cut-off signal when the valve core is in the fully open, fully closed, or self-locking state.
6. The state selection switch can be used to set (forward and reverse actions).
7. The state selection switch can be used to set the input signal to (DC4-20mA or DC1-5V).
8. Adjusting the work zero point (starting point) and travel (ending point) is simple and easy.
9. When there is a sudden power outage, it can ensure that the valve core is self-locking.
10. Adopting synchronous belt transmission effectively reduces noise.
11. Delay protection function, capable of implementing state self-locking at rated load; When a fault occurs, it can immediately activate the protection and reverse the operation to cancel the delay protection.

Main technical parameters

External wiring
The input and output signals should use shielded cables The power line shall not share the same cable with the signal line

environmental conditions

performance parameters