Axial external pressure corrugated compensator

NegotiableUpdate on 04/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Puhui specializes in producing corrugated compensators and provides free installation solutions Serve customers with care Service hotline: 0317-8294124.

Product Details

Puhui brand axial external pressure corrugated compensator

Axial external pressure corrugated compensator - (compensator also known as expansion joint, corrugated pipe)

Purpose:

Axial outward pressure compensatorMainly absorbing axial displacement, it has the advantages of large compensation, good insulation performance, and the ability to eliminate residual media.

model:

Our factory produces DN32-DN1600 with pressure levels ranging from 0.1Mpa to 2.5Mpa

Product axial compensation amount:

18mm-400mm

1、 Model Example

Example: 0.6TWY500 × 8JB Indicating: An axial external pressure corrugated compensator with a nominal diameter of 500mm, a working pressure of 0.6MPa (6kg/cm2), and 8 wave numbers connected to stainless steel pipes. Note: The setting of the drain port shall be in accordance with user requirements.

IIAxial outward pressure compensatorinstructions:

The axial type external pressure corrugated compensator mainly absorbs axial displacement and has the advantages of large compensation amount, good insulation performance, and the ability to eliminate residual media.

3、 Calculation of Bearing Force for Axial External Pressure Ripple Compensator: (Without Considering Temperature Correction of Compensation Amount and Stiffness)

Example: One carbon steel pipeline with a nominal diameter of 500mm and a working pressure of 0.6MPa; The medium temperature is 350 ° C, the minimum ambient temperature is -10 ° C, the installation temperature is 20 ° C, the pipeline length is as shown in the diagram, and the fatigue failure frequency is required to be 3000 times. To install an external pressure compensator, calculate the force exerted by the compensator on the support. The general installation position of the external pressure compensator is as follows (as shown in the diagram):

Solution: (1) Thermal deformation calculation: △ L=a · t · L=0.0133 × 360 × 30=143.6mm (2) According to the usage conditions and thermal deformation calculation data, 0.6TWY500 × 8F, N=3000 times can be selected for sample inspection, X0=192mm Kx=272N/mm。 (Without pre deformation) (3) A and B pipe supports are subjected to axial force: Internal pressure thrust: Fp=100 · P · A=100 × 0.6 × 3167=190020N Axial elasticity: Fx=Kx · X \ \ 272 × 143.6=39059.2N Fz=Fp+Fx=190020+39059.2=229079N

Puhui specializes in producing corrugated compensators and provides free installation solutions Serve customers with care Service hotline: 0317-8294124.