BAX1501LED Explosion proof Lamp 50W Wall mounted Ceiling Suspended Rod Lamp

BAX1501LED Explosion proof Lamp 50W Wall mounted Ceiling Suspended Rod Lamp

LEDWhat are the places where explosion-proof lamps can be used?

1Can be used for storage in warehouses: paint warehouse,oil depot,Grain and oil warehouse,feed warehouse,Farm warehouse,cement silo,Grain warehouse,wine cellar,Fuel warehouse,chemical warehouse,Oil depots, etc,Smoke storage,Cold storage, etc;

2Can be used in flammable and explosive places: chemical plants,paint booth,Coal mine factory,gas station,Gas station,gas filling station,Coal mine tunnel,Coal stacking area,Garment factory,Power plant,refinery,Motor room,pharmaceutical factory,Coal washing plant,Liquefied gas station,Natural gas stations, etc;

3Can be used in harsh environments such as high temperature and humidity: cement plants,fertilizer plant,farm,railway tunnel,steel mill,metallurgical plant,flour mill,power station,Mineral water plant,waterworks,food processing plant,distribution room,distribution substation,Polishing and Grinding Workshop,boiler room,Shipyard, etc;

4It can also be used for energy-saving renovation and maintenance in difficult places;

BAX1501LED Explosion proof Lamp 50W Wall mounted Ceiling Suspended Rod LampProduct Features:
1Select high-quality chips with excellent light maintenance rate and high light efficiency;
2Adopting surface mount technology to significantly improve thermal conductivity;
3Carefully designed honeycomb shaped light distribution structure to effectively improve the efficiency of lighting fixtures;
4Adopting constant current drive, with short-circuit and overvoltage protection functions;
5TheEAType can be used as normal working lighting and has emergency functions;EBThe type is purely used as emergency lighting and is usually turned off,ATheBThe type can immediately start emergency lighting when the main power is cut off, and can also be used for external switch control to start at any time during the main power outage.
6It has excellent electromagnetic compatibility and will not cause any interference to other electrical appliances or transmission networks. The power supply itself has excellent electromagnetic resistance力；
7Has electromagnetic compatibility and tolerance20%Voltage fluctuations;
8The driving power supply adopts sealing technology to ensure that the components are not corroded;
9Carefully design a three cavity independent structure to ensure stable operation of all electronic components;
10AdoptingIICExplosion proof structure, andIP66Protection level, with excellent explosion-proof protection performance;
11Adopting a side cavity open cover connection method, it is convenient for users to wire and maintain, and multiple installation methods are available for users to choose from.

1.The components of explosion-proof lamps should be made of materials that have sufficient resistance to chemical, mechanical, and battery medium corrosion.
2.The shell and protective net should be made of metal materials that will not produce dangerous sparks due to impact and falling, or covered with safety materials.
3.The distance between the transparent component and the light bulb, and the power of the light bulb is less than3WWhen, it must not be less than3mmThe power shall not be less than3WWhen, it must not be less than5mm.
4.The distance between transparent parts and protective nets shall not be less than5mmThe mesh area shall not exceed2000mm2.
5.The introduction cable of the lamp is clamped and applied15kgThe tension cable of the force shall not be pulled off.

Technical Specifications:

Execution standard:GB3836.1，GB3836.2，GB12476.1

Scope of application:1District2DistrictIIAIIBIICClass,T1-T6

Rated voltageAC220V AC/DC12~36V

Equipped with light source:LED（80WThe100WThe120W）

Power factor:0.95

Cable specifications:Φ10-Φ14mm

Explosion proof mark:ExdeⅡCT6 Gb

Protection level:IP66

Anti corrosion grade:WF2

Applicable height: 3-8M