BSI-2A biphasic excitation isolator, BSI-2A biphasic electrical stimulator

NegotiableUpdate on 02/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The BSI-2A biphasic excitation isolator and BSI-2A biphasic electrical stimulator have been optimized for applications that require precise control of rectangular waveform excitation

Product Details

The BSI-2A biphasic excitation isolator and BSI-2A biphasic electrical stimulator have been optimized for applications that require precise control of rectangular waveform excitation. It is designed forDual phase single channel external timing circuit(such as MLS BPG-1P, digital controller, or other single-phase pulse signal sources, such as computers). External timed input gates two optically isolated, independent battery powered constant current sources. Due to their independent isolators, range control, and output circuits, the outputs of "A" and "B" can be used as independent single-phase excitations, isolated from each other and from the control input. Each output has an inverting switch and an additional terminal for installing coupling capacitors or current monitoring resistors. The two sets of output terminals are cleverly placed, so adding two jumpers (provided) can immediately convert the device to dual phase or pulse pair operation.

BSI-2A biphasic excitation isolator, BSI-2A biphasic electrical stimulator has high compliance, high isolation, and the same convenient portable plastic housing as BSI-1A. The main difference is that its output circuit has been optimized for gate switch operation, rather than proportional input following. This working mode itself has very low noise and eliminates the danger of applying DC current due to low control signal level offset between output pulses. It also allows manual adjustment of the output level from the device itself, which can be placed near the preparation. If you need non rectangular waveforms (such as sine waves, slopes, or computer D/A drives), we recommend BSI-1A, which is a linear biphasic excitation isolator with a complete range of constant current and constant voltage output levels.

Microprobes BSI-2A Biphase Excitation Isolator, BSI-2A Biphase Electrical Stimulator Product Specifications:

BSI-2A - Biphase Excitation Isolator

constant current	Each channel is 100 nA to 10 mA with polarity reversal switch.
Current control range	1, 10, 100, and 1000 uA per turn, rotated in 5 positions
output control	10 turn potentiometer with indicator dial for each channel.
Output linearity	1% of all ranges
Obey voltage	Each channel has a 90 volt, independent battery source.
isolation	1000 VDC (opto isolated) 30 pF between any two
output connection	3 banana terminals, 3 per channel.
Input connection	Floating BNC socket
Input signal: A/B biphasic	Minimum ± 2.8V, TTL compatible, protection up to ± 15V
Input signal: Only B	Minimum ± 2.8V, TTL compatible, protection up to ± 15V
power supply	2: 9-volt lithium battery ULTRALIFE # U9VL(Replace with BAK BPL-l)
battery life	At least 100 hours
package	Desktop installation with support handle, 3.5 inches high x 26 inches wide x 7.5 inches deep (with few handles)
weight	6Ibs (battery installed at the factory)