Bipolar symmetrical pulse DC power supply (positive and negative commutation pulses)

Product Introduction: Bipolar Symmetric Pulse DC Power Supply (Positive and Negative Reversing Pulse) is a type of DC power supply that adds commutation to the output of a single pulse DC power supply

Product Introduction:

Bipolar symmetryPulse DC power supply(Positive and negative commutation pulses) are in singlePulse DC power supplyOn the basis of this, the product has the functions of positive pulse, negative (commutation) pulse, proportional pulse, interval pulse, counting pulse, timing pulse, program pulse, etc. The pulse width is 1us-999ms, the proportional value is 1-0000000 1, the interval quantity is 1-999:1-999, the pulse counting is 1-998001, the timing range is 1-998001S, the duty cycle is 1-99%, the frequency range is 1HZ-100KHZ, the frequency accuracy is 1HZ, 5 program pulses are optional, and the running time of each program pulse is 1-998001S; Voltage range 6-30KV optional, current range 1-30KA optional, user-friendly display interface, pointer and digital display mode, one key start function, master-slave control mode, etc.

Technical Specifications:

1. AC input: single-phase 220VAC, three-phase 380VAC

2 Power factor: ≥ 0.9

Efficiency: ≥ 86%

4 Output waveforms: DC (at 100% duty cycle), positive pulse, negative pulse

5 working modes: voltage stabilization, current stabilization

6 Output frequency: 1HZ~100KHz (adjustable continuously)

7 Output Duty Cycle: 0-100% (adjustable continuously) Pulse Width: 1us-99ms

8 Output amplitude: Output voltage: 6, 12, 24, 36, 48, 60, 72, 96, 200, 300, 500, 1000, 2000, 5000, 7200, 10000, 16000, 20000, 25000, 30000V, 40000V, 60000V, 80000V, 100000V continuously adjustable; Output pulse current: 0.1-20000A continuously adjustable

9. Environmental temperature: -10 ℃ to 50 ℃

10 Cooling methods: air cooling, water cooling

11 Control forms: Local control (7-inch LCD touch screen), 485 communication (MODBUS communication protocol)

12 Control mode: 7-inch LCD touch screen

13 pulse forms: positive pulse, negative pulse, proportional pulse, interval pulse, counting pulse, timing pulse, program pulse.

14 pulse system: pulse height symmetrical pulse (UHD), pulse height independent adjustment (UHN).

15 overvoltage, undervoltage, overcurrent, overtemperature, IGBT fault, fault protection selection, fault locking and display