CJ type high-efficiency fully automatic water purifier

Product details: CJ type high-efficiency fully automatic water purifier (1). Product features: 1. The water purifier can automatically complete a series of operating procedures such as water distribution, reaction, flocculation, sedimentation, sludge collection, filtration, backwashing, and sludge discharge. As long as water quality monitoring and measurement are carried out regularly, no other operation management is required; 2、 Equipped with overlapping reaction precipitation, it can withstand high turbidity impact loads and reduce the influent turbidity from 3000mg/l to below 3mg/l at once. Due to the use of partial sludge reflux method, the coagulation rate of raw water is accelerated, and the adsorption probability can be increased several times. Therefore, it can adapt to various water temperatures and turbidity of raw water, especially when the bottom temperature and turbidity are the most significant. Due to the utilization of some sludge reflux, the dosage of medication is greatly reduced and operating costs are lowered. 3、 Due to the use of physical principles and the full utilization of siphon and anti siphon principles, all water inflow and outflow, backwashing inflow and outflow, etc. do not require valve control, so there is no operational failure problem. The service life of the equipment is relatively long. 4、 The automation of the water purification system ensures efficient filtration (when the turbidity of the raw water is less than 3000mg/l, the turbidity of the filtered water can be maintained below 3mg/l) and automatic backwashing, without the need for additional backwashing water pumps or air compressors, which can save a lot of infrastructure investment and daily operation, maintenance, and upkeep costs. 5、 The low self consumption rate of water is about 3%, which plays a positive role in saving limited water resources. 6、 Small footprint, compared with general water purification structures, it can save more than 50% of the land, with a height of about 4.10m, and can be installed indoors and outdoors. 7、 Easy to expand, renovate, relocate, or relocate for reuse. (II .....

CJ type high-efficiency fully automatic water purifier
（1） Product Features

1. The water purifier can automatically complete a series of operating procedures such as water distribution, reaction, flocculation, sedimentation, sludge collection, filtration, backwashing, and sludge discharge. As long as the water quality is monitored and measured regularly, no other operation management is required;

2. Equipped with overlapping reaction precipitation, it can withstand high turbidity impact loads and reduce the influent turbidity from 3000mg/l to below 3mg/l at once. Due to the use of partial sludge reflux method, the coagulation rate of raw water is accelerated, and the adsorption probability can be increased several times. Therefore, it can adapt to various water temperatures and turbidity of raw water, especially when the bottom temperature and turbidity are the most significant. Due to the utilization of some sludge reflux, the dosage of medication is greatly reduced and operating costs are lowered.

3. Due to the use of physical principles and the full utilization of siphon and anti siphon principles, all water inflow and outflow, backwashing inflow and outflow, etc. do not require valve control, so there is no operational failure problem. The service life of the equipment is relatively long.

4. The automation of the water purification system ensures efficient filtration (when the turbidity of the raw water is less than 3000mg/l, the turbidity of the filtered water can be maintained below 3mg/l) and automatic backwashing, without the need for additional backwashing water pumps or air compressors, which can save a lot of infrastructure investment and daily operation, maintenance, and upkeep costs.

5. The low self consumption rate of water is about 3%, which plays a positive role in saving limited water resources.

6. Small footprint, compared with general water purification structures, it can save more than 50% of the land, with a height of about 4.10m, and can be installed indoors and outdoors.

7. Easy to expand, renovate, relocate, or relocate for reuse.

（2） Design parameter table

（3） List of selected parameters such as pipeline, power supply, pump type, etc

Note:
1. The direction of the inlet of the various pipelines mentioned above can be arbitrarily changed by 180 degrees to meet the needs of the overall layout.

2. The applicable conditions for the selection of reference pump types and motor power are: the difference between the lowest water level of the pump and the operating water level of the water purification device is not more than 8 meters, and the sum of losses along the way and locally from the water source to the water purification device is not more than 4 meters. If the hydraulic conditions at the application site do not match the above situation, a different pump should be selected according to the actual situation.

（4） CJ Automatic Water Purifier Size List

Explanation:
1. All parameters in this table are in millimeters.

2. The size of this water purification device is a conventional design size, and special design is required if special size is needed.