CU Swimming Pool Equipment

Fuzhou Sanhui Electromechanical Co., LtdsupplyKangchuinuo (CU)Swimming pool equipment, the company provides a one-stop service for system design, installation, and after-sales service of swimming pool equipment in Fuzhou.

The working principle of CU swimming pool equipment:

The swimming pool water quality treatment system follows the principle of dynamic equilibrium and achieves thorough purification of water quality during the circulation treatment process.

The swimming pool water is collected through the overflow channel and collected in the balance pool. It enters the circulating water pipeline together with the supplementary water, and is driven by the circulating water pump to pass through the hair collector and filter out hair and larger particles and debris; Then enter the automatic flocculant addition system.

The system controls the precision metering pump to accurately add flocculant aluminum sulfate solution (10% Al2 (SO4) 3) to the circulating water pipeline according to the set ratio, promoting the coagulation of small substances in the gelatinous state in the circulating water into larger flocculent particles, which then enter the quartz sand filter for thorough filtration.

The pH automatic adjustment system compares the measurement signal of the pH measurement sensor with the set value, and the microcomputer performs PLD operation on the difference to issue control commands. The precision metering pump injects dilute salt (10% HCl) into the circulating water to control the acidity and alkalinity of the swimming pool water within the national standard range (pH=7.2-8.0).

The final disinfectant automatic adjustment system uses residual chlorine sensors or redox potential sensors to measure the disinfection and sterilization ability of the swimming pool. The controller controls the metering pump to accurately add sodium hypochlorite disinfectant (5% NaClO) to maintain the residual chlorine concentration in the swimming pool water within the national prescribed range (0.3-0.6ppm), effectively killing various bacteria and completing purification and disinfection.

Application scope of CU swimming pool equipment:

1. Industrial water purification

2. Pre treatment of drinking water

3. Agricultural irrigation water filtration

4. Large scale seawater and freshwater aquaculture water filtration

5. Large scale aquariums, seafood pools, and aquarium water filtration

6. Large landscape pools, fountain pools, and water feature engineering pool water filtration

7. Large swimming pool, hot spring pool, sauna, water park, and SPA massage pool water filtration

Product features of swimming pool equipment from Kangchuinuo (CU):

1. Introducing foreign professional technology for production, the buried filtration system box adopts imported high-strength materials, which are injection molded in one go and have the characteristics of UV resistance, durability, corrosion resistance, leakage prevention, and no cracking.

2. The buried filtration system does not require equipment rooms and is the first to use three-dimensional circulation filtration. It adopts the traditional sand tank pipe laying method to ensure thorough filtration of swimming pool water quality.

3. Ultra low silence, noise level meets national environmental standards.

4. The system adopts a multifunctional microcomputer touch screen controller with a remote control, which can perform fully automatic operation or personalized control of the equipment.

5. Using ozone, aeration dissolved oxygen, and activated carbon fine filtration to reduce drug dosage and enhance nutrient content in water.

6. Fully automatic water temperature sensing and display function, accurately measuring water temperature.

7. Automatic medication dispensing function.