CW215 stepper motor driver

1、 Product Introduction

1. Overview

CW215 is a segmented high-performance stepper motor driver that uses imported specialized chips. It is suitable for driving two-phase and four phase hybrid stepper motors below 1.5A, such as 42BYG and 39BYG. The subdivision function of CW215 improves the operating accuracy of stepper motors by 1-64 times. A chopping frequency of 20000 times per second can eliminate chopping noise in the driver. Another unique feature is static automatic current reduction: when the motor is in a stopped state, the output current can automatically decrease to a lower value, thereby reducing the heating of the motor and driver.
Its working current range is 0.2A-1.5A, with a total of 16 output currents and a current resolution of approximately 0.5A. It has protection functions such as automatic half current, self check, overvoltage, undervoltage, and overcurrent. This driver is powered by DC and is recommended to operate within a voltage range of 18VDC-40VDC.

2. Characteristics

• High performance, low price
• Built in micro step segmentation
Automatic half flow when stopped
• Optoelectronic isolation signal input/output
The maximum pulse response frequency can reach 70KHz
Low temperature rise and low vibration
Online adaptive PID technology

3. Main application areas

Suitable for various small automation equipment and instruments, such as pneumatic marking machines, labeling machines, cutting machines, laser marking machines, plotters, small engraving machines, CNC machine tools, handling devices, etc. The application effect is particularly good in devices where users expect low vibration, low noise, high precision, and high speed.

4. Electrical specifications

2、 Parameter settings

1. Current regulation

Dial switch: ON=0; OFF=1

2. Subdivision adjustment

Dial switch: ON=0; OFF=1

3、 Interface wiring instructions

1. Control signal interface

If the input signal voltage amplitude is greater than 5V, the input terminal needs to be connected in series with a current limiting resistor (refer to the control signal interface circuit diagram).

2. Strong electrical interface

3. Control signal interface circuit

Detailed description of signal interface: The interface circuit inside the CW5042 stepper motor driver adopts optocoupler signal isolation, and R in the figure is an external current limiting resistor. The connection method is differential connection, with good anti-interference performance.

4、 Common faults

5、 Appearance and installation dimensions (unit: mm (inch), 1 inch=25.4mm)

The external dimensions of the driver are 100 × 59 × 19mm, as shown in the external dimension diagram. Pay attention to leaving more than 10CM of space for heat dissipation. During installation, it should be tightly attached to the metal cabinet to facilitate heat dissipation.