Catalytic combustion equipment for glass production line

Catalytic combustion equipment for glass production lineCharacteristics:
1.Catalytic combustion equipment for glass production line
By adopting a combination process of adsorption concentration and catalytic oxidation, the entire system achieves a closed cycle purification and desorption process. Compared with organic waste gas purification devices for recycling, it does not require additional energy sources such as compressed air and steam, and does not generate secondary pollution during operation. The equipment investment and operating costs are low.
2. The front-end adopts a dry high-efficiency dust filtration device, which has high purification efficiency and ensures the service life of the adsorption device.
3. Using specially formed honeycomb activated carbon as the adsorbent material, the adsorbent has a long lifespan, low adsorption system resistance, and high purification efficiency;
4. Honeycomb ceramics impregnated with high-quality precious metals palladium and platinum are used as catalysts, with a catalytic purification rate of over 97%, long catalyst life, low exhaust gas decomposition temperature, short desorption preheating time, and low energy consumption.
5. The activated carbon adsorption bed for adsorbing organic waste gas can recycle the hot gas after catalytic combustion for desorption. The desorbed gas is then sent to the catalytic combustion chamber for purification treatment. When the concentration of organic waste gas reaches 2000PPM or above, spontaneous combustion can be maintained. No need for additional energy, low operating costs, and significant energy-saving effects.
6. Adopting a microcomputer centralized control system, the equipment operation and operation process achieve full automation, stable and reliable operation.
7. The safety facilities are complete, and safety fire dampers are installed between the gas source and equipment. The desorption temperature entering the activated carbon bed is strictly controlled during desorption, and flame arresters, temperature sensing rods, explosion-proof ports, alarms, and automatic shutdown are installed
The catalytic combustion equipment in the glass production line is an integrated equipment of Hebei Environmental Protection. The exhaust gas generated during the glass spraying and painting process can be treated by catalytic combustion equipment, and the emission can reach within 60mg of non methane total hydrogen. If you ask how to treat the exhaust gas from glass painting, please refer to the catalytic combustion of Zhonghe Environmental Protection for treatment. This equipment filters exhaust gas to achieve purification and emission protection measures