Centrifugal filter bag

brief introduction

Xinxiang Hengxin General Equipment Co., Ltd. is a manufacturer of centrifuges, three legged centrifugesPlate CentrifugeDehydration equipment such as dewatering machines and industrial dewatering machines, as well as screening equipment such as swing screens and vibrating screens. The company is located in Xinxiang City, Henan Province.

Centrifugal filter bag

The centrifuge filter bag is placed inside the centrifuge liner. When the machine is running, the moisture in the material permeates through the filter bag and flows out of the machine, while the solid material is trapped on the filter bag. After the machine stops, remove the material from the filter bag to complete a dehydration process.

Tripod centrifuge accessories

The commonly used accessories (vulnerable parts) of a tripod centrifuge generally include brake pads, filter bags, throw blocks, brake rings, motor starting wheels, etc.

Brake pads

The material of centrifuge brake pads is rubberwood, with a thickness of generally 8mm. Brake pads are the main component of the three legged centrifuge brake system, fixed on the brake ring, and each centrifuge has 4 brake pads.

Filter bag

Filter bag, also known as filter cloth, filter bag, etc., is the filtering medium of centrifuge. The material is generally polypropylene, with a mesh size between 100-2000.

Shake the block

The centrifuge block is located in the clutch slot of the motor starting wheel, and there are a total of 4 blocks in one starting wheel. When starting the centrifuge, the swinging block is extended, and friction drives the starting wheel to slowly start the centrifuge. Its function is to slowly start the centrifuge and avoid damage to the motor life caused by hard start.

Brake ring

The brake ring is a component that fixes the brake pads. The brake ring is riveted onto the centrifuge disk, and one centrifuge has two brake rings.

Motor starting wheel

The starting wheel of the motor is composed of a pulley, a clutch groove, a swing block, a cross shaft, a cover plate, cover plate screws, etc. It is the clutch system of the centrifuge, and its function is to slowly start the centrifuge.