-
E-mail
sxsepri@126.com
- Phone
-
Address
Room 10218, Building 1, No. 32 Jinye Road, High tech Zone, Xi'an City, Shaanxi Province
Product Categories
Shaanxi Saipurui Electric Co., Ltd
Charging station dehumidifier
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Charging station dehumidifier
Product Details
Car charging station dehumidifier
Scope of Application
This product is mainly suitable for dehumidification of car charging piles, and can also be used in other power cabinets. It has a significant effect on preventing problems such as equipment aging, insulation strength reduction, secondary terminal breakdown, material mold, and steel structure corrosion caused by moisture and condensation inside the cabinet.
♦ Product Introduction
The SEPRI-CS-NL7 anti condensation device for car charging piles is a high-tech product specially developed for the moisture of electric vehicle charging piles. This device is installed inside the charging station, and by creating condensation conditions locally, the humid air inside the cabinet condenses into water and is discharged outside the cabinet, achieving the goal of quickly reducing the humidity inside the cabinet and suppressing condensation.
This product can also be used in other power cabinets, and has a significant effect on preventing problems such as equipment aging, reduced insulation strength, secondary terminal breakdown, material mold, and steel structure corrosion caused by moisture and condensation inside the cabinet.
♦ Product Parameters
♦ Product Features
1. Suitable for use in spaces that are not too narrow and can provide power supply
2. Quickly reduce the humidity inside the electrical cabinet control cabinet and remove any moisture directly from outside the cabinet
3. Vertical design, easy to install.
4. Integrated structure with built-in power supply.
♦ Product installation and debugging
1. Preparation before installation
1) According to the principle of convenient maintenance and the location of condensation inside the on-site cabinet, the device can be hung inside the cabinet.
2) Open the box and check the quantity of products, accessories, working power supply, etc.
3) Before installation, determine the product installation position, power supply laying, drainage pipe laying, relative sealing of the cabinet, and on-site construction requirements.
2. Product installation
1) The device is mounted on metal rails in the middle and lower positions inside the cabinet, ensuring that the device is level and not tilted during installation.
2) Ensure a space of more than 10 centimeters between the inlet and outlet of the device and other objects, and ensure that the fan outlet is unobstructed.
3) Connect one end of the water intake pipe to the drainage outlet of the device, fix it with a clamp, and keep the middle of the water outlet pipe straight, without winding or bending, to prevent poor drainage; The other end leads to the outside of the cabinet and is equipped with insect proof plugs. The length of the water pipe can be cut according to the on-site situation.
♦ Product installation example
Scope of Application
This product is mainly suitable for dehumidification of car charging piles, and can also be used in other power cabinets. It has a significant effect on preventing problems such as equipment aging, insulation strength reduction, secondary terminal breakdown, material mold, and steel structure corrosion caused by moisture and condensation inside the cabinet.
♦ Product Introduction
The SEPRI-CS-NL7 anti condensation device for car charging piles is a high-tech product specially developed for the moisture of electric vehicle charging piles. This device is installed inside the charging station, and by creating condensation conditions locally, the humid air inside the cabinet condenses into water and is discharged outside the cabinet, achieving the goal of quickly reducing the humidity inside the cabinet and suppressing condensation.
This product can also be used in other power cabinets, and has a significant effect on preventing problems such as equipment aging, reduced insulation strength, secondary terminal breakdown, material mold, and steel structure corrosion caused by moisture and condensation inside the cabinet.
♦ Product Parameters
| Working power supply voltage | DC12V |
| rated power | ≤13W |
| display mode | LED running status indicator |
| Dehumidification threshold | Humidity RH=50% (default), can be changed according to factory settings as required |
| dehumidification capacity | 230mL/day at 35 ℃ and RH=85% operating conditions |
| Working humidity range | 20%～95%RH |
| Installation environment temperature range | Not lower than -20 ℃, not higher than 60 ℃ |
| Dehumidification working temperature range | Not lower than 1 ℃, not higher than 60 ℃ |
| Overall dimensions | 95mm×65mm×60mm |
| drainage method | Hose drainage |
| weight | About 360g |
| Dehumidification volume | ≤0.3m³ |
| Installation method | 35 rail buckle type |
| working method | auto-run |
1. Suitable for use in spaces that are not too narrow and can provide power supply
2. Quickly reduce the humidity inside the electrical cabinet control cabinet and remove any moisture directly from outside the cabinet
3. Vertical design, easy to install.
4. Integrated structure with built-in power supply.
♦ Product installation and debugging
1. Preparation before installation
1) According to the principle of convenient maintenance and the location of condensation inside the on-site cabinet, the device can be hung inside the cabinet.
2) Open the box and check the quantity of products, accessories, working power supply, etc.
3) Before installation, determine the product installation position, power supply laying, drainage pipe laying, relative sealing of the cabinet, and on-site construction requirements.
2. Product installation
1) The device is mounted on metal rails in the middle and lower positions inside the cabinet, ensuring that the device is level and not tilted during installation.
2) Ensure a space of more than 10 centimeters between the inlet and outlet of the device and other objects, and ensure that the fan outlet is unobstructed.
3) Connect one end of the water intake pipe to the drainage outlet of the device, fix it with a clamp, and keep the middle of the water outlet pipe straight, without winding or bending, to prevent poor drainage; The other end leads to the outside of the cabinet and is equipped with insect proof plugs. The length of the water pipe can be cut according to the on-site situation.
♦ Product installation example
Similar Product Recommend
