-
E-mail
15754351088@163.com
- Phone
-
Address
H10-2, Building 50, Wuxi Zhongguancun Software Park, No. 6 Gancheng Road, Xinwu District, Wuxi City, Jiangsu Province
Product Categories
Jiangsu Panbao Pump Industry Co., Ltd
Chemical nickel plating filter machine
NegotiableUpdate on 03/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product features: 1. This filter is resistant to high temperatures, designed without a shaft seal, and can run idle without damaging the pump. 2. Easy to operate: A. Add water directly to the dosing tank without closing the inlet and outlet ball valves. B、 After filling the dosing tank with water once, turn on the machine and then turn off the machine to add water again. Repeat the operation three times and it returns to normal. C、 As long as the air in the inlet duct is cleared, it can be turned on at any time. 3. After cleaning the filter core, it is also quickly put into work. 4. There is no ball valve between the vertical pump outlet and the filter cartridge of the filter machine, which will not produce liquid crystals due to long-term disuse, making it difficult to use.
Product Details
Panbao acid alkali resistant chemical nickel plating filter machine
Product features:
1. This filter is high temperature resistant and designed without a shaft seal, allowing for idle operation without damaging the pump.
2. Easy to operate:
A、 Add water directly to the dosing tank without closing the inlet and outlet ball valves.
B、 *After filling the secondary dosing tank with water, turn on the machine and then turn off the machine to add water again. Repeat the operation three times and it returns to normal.
C、 As long as the air in the inlet duct is cleared, it can be turned on at any time.
3. After cleaning the filter core, it is also quickly put into work.
4. There is no ball valve between the vertical pump outlet and the filter cartridge of the filter machine, which will not produce liquid crystals due to long-term disuse, making it difficult to use.Model Description:
① Model number: BM
② Model code
③ Pump horsepower: 1/4-1/4HP 1/3-1/3HP 1/2-1/2HP 1-1HP 2-2HP 3-3HP
④ | P-Pump body material: CFRPPP
|K-Pump body material: PVDF
|S-Pump body material: SUS
⑤ | U: The entrance and exit are arbitrary
|H: Entrance and exit sleeve type
|F: Entrance and exit flange type
⑥ | N: Tight sealing
|V: Sealed tightly
⑦ B-filter core lock cap type
⑧ | J: The entrance and exit comply with JIS specifications
|D: The entrance and exit are DIN standard
|A: The entrance and exit comply with ANSI specifications
Performance Specification Table:
| model | Inlet and outlet diameter (mm) | power | Full head (M) | Full flow rate (L/min) | ||
| Phase level | series | Horsepower (HP) | ||||
| BM-1001-1/4HP | 32×25 | 3φ | 2 | 1/4 | 6 | 20 |
| BM-2001-1/3HP | 32×25 | 3φ | 2 | 1/3 | 6.5 | 35 |
| BM-1004-1/3HP | 32×25 | 3φ | 2 | 1/3 | 6.5 | 60 |
| BM-2004-1/2HP | 40×32 | 3φ | 2 | 1/2 | 7 | 80 |
| BM-2006-1HP | 50×40 | 3φ | 2 | 1 | 12.5 | 160 |
| BM-2008-2HP | 50×40 | 3φ | 2 | 2 | 15 | 200 |
| BM-2012-2HP | 50×40 | 3φ | 2 | 2 | 15 | 250 |
| BM-2018-3HP | 50×40 | 3φ | 2 | 3 | 20 | 320 |
