Chlorine dioxide electrolytic salt method generator

Chlorine dioxide electrolytic salt method generator

Control panel and control system functions:
Temperature controller: Accurately and effectively displays and controls the reaction temperature to achieve the conversion rate of the equipment. Power indicator light: lights up when powered on; Low level indicator light for raw material: It lights up when the raw material is depleted. Feeding light: It lights up when the switch is turned to the Refill position. Buzzer, alarm in case of malfunction or shortage of materials. The dosing system includes other necessary accessories such as relays, switches, ammeters, voltmeters, etc. The negative pressure generated by the water injector during water injection is transmitted to the buffer through a plastic tube and then reaches the reaction chamber. The raw materials are injected into the reaction chamber by a high-precision metering pump, and after sufficient reaction, chlorine dioxide solution and a small amount of chlorine are produced. The electrical control cabinet is equipped with complete facilities and components. And provide power cables and control cables inside the device, and connect and lay them. Maintain a certain working negative pressure in the buffer, at which point the system allows raw materials to enter the reaction chamber. Otherwise, the system will shut down and sound an alarm.
Chlorine dioxide electrolytic salt method generator

maintain:
In order to maintain the equipment in good working condition, users are requested to do the following in the daily maintenance of the electrolytic chlorine dioxide generator:
1. Check and adjust the power water pressure daily.
2. The air intake should be regularly checked to ensure it is unobstructed with the outside world.
If bubbles are generated in the glass tube of the liquid level gauge, the sealing ring should be replaced immediately.
4. Before and after suction, the filter head must be cleaned thoroughly.
5. Pay attention to the cleanliness of the water injector and one-way valve to prevent blockage.
If there is any leakage in the metering pump pipeline, it should be immediately sealed and inspected and treated.
7. Always maintain indoor ventilation to prevent gas leakage and environmental pollution.