Chlorophyll analyzer CP-5100

NegotiableUpdate on 02/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Widely used in field investigations and research of water quality in oceans, rivers, reservoirs and watersheds, tap water, and other areas. The early warning system for drinking water and aquaculture can quickly detect the proliferation of toxic algae.

Product Details

application area

Instrument features

144 * 144 microcomputer designed chlorophyll controller

◆ Outdoor waterproof design suitable for wall mounted, panel mounted, and circular pipe installation

◆ Equipped with backlight sensor, automatic and manual backlight setting function

◆ Provide electrode automatic cleaning device contacts, program setting output

Large LCD display screen with operation status and special symbol display

◆ Equipped with automatic calibration; Manual/automatic temperature compensation function

◆ Password lock and combination key enter the setting, calibration mode design, and increase security protection

Equipped with RS-485 standard MODBUS communication protocol, it can be directly connected to digital systems (MB-300-CPRS serial only)

Two sets of programmable outputs (MB-300-CP serial only)

Technical Parameter

Measurement range 0-5ug/L, 0-50ug/L, 0-500ug/L

Measurement accuracy of 1 ppb. ± 5% correction function for the corresponding signal level of Rhodamine WT dye

Pressure range 0.1Mpa/10m water depth

◆ Conditions require uneven distribution of chlorophyll in water, it is recommended to monitor multiple points; The turbidity of the water quality must be below 50NTU

◆ Digital filter adjustable from 0 to 60 seconds/factory set value of 30

◆ Storage temperature -15~65 ℃

Measure temperature from 0 to 45 ℃

Relay output with two sets of ON/OFF contact outputs, high and low points, and hysteresis can be set according to any program, 240VAC/0.5A

◆ Analog output 1 or 2 channels of 4~20mA programmable analog signal output, with corresponding output values that can be set, with a load of 500 Ω

Main materials

◆ Shell SUS316L

◆ O-ring fluororubber

◆ Waterproof cable

Basic parameters

◆ AC power supply 100V 240VAC ± 10%, 50/60Hz

◆ DC power supply 20 40VDC